buying a turbo
#1
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Nanaimo, B.C
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
buying a turbo
i have a few links to turbos that interest me im just curious on anyone elses opinions of the 2 , the turbo will be going on my soon to be rebuilt 12a, im going to have somone i know fab the turbo manifold, i already have a flange and such ready
and what size of carb would be enough for an extended port and turbo ?
and if anyone has any wright ups about doing a 12a turbo themselves would be awsome thanks. It would be helpful to see what others have done.
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6755
and what size of carb would be enough for an extended port and turbo ?
and if anyone has any wright ups about doing a 12a turbo themselves would be awsome thanks. It would be helpful to see what others have done.
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742
http://cgi.ebay.com/ebaymotors/ws/eB...&category=6755
#2
Banned. I got OWNED!!!
the top turbo looks damaged (junk) thebottom turbo in ok, internal wastegate, so you dont need to buy one and fab it into the manifold , but your going to be limited to about 300 hp with that turbo...what intake were you planning on using?
#4
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Nanaimo, B.C
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
hmmm well for the intake i was unsure , im still trying to gather as much information as possible.. i know one thing, its going to be a long project but im prepared, i had a feeling the top one looked damaged.
and btw how good of condition is the turbo in that you have, any pics by any chance?
and btw how good of condition is the turbo in that you have, any pics by any chance?
Thread
Thread Starter
Forum
Replies
Last Post