i need some help...where can i find templates to bridgeport my 6port gsl-se? i plan on using carbon 3mm seals and a lightweight flywheel, i have the racing beat street port exhaust system on the car now, is there anything else i should do? please contact me directly, my email is hrricanerx7@hotmail.com or u can IM me on aol/aim, my sn is hrricane21. Thanks!

 

The template:

http://www.mazdatrix.com/toolport.htm


The faq:

http://www.mazdatrix.com/faq/port6p.htm

 

If you are still using the stock ecu and not an aftermarket one or a carb, you are wasting your time.

 

the 6 ports wil lnot work with the sotck egi and a port job. you have to go carb and ditch the injection. too bad because the injection is sooooo smooth!

 

so if you port a 6 port you have to ditch the EGI? There is no way to keep the vehicle fuel injected?

 

Of course you can. It just means you have to run an aftermarket ecu.

 

Is that with ALL port jobs, including a mild street port?

 

im using an apexi super afc, is that enough? also i have the aux ports wired open