1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Brake light won't go off

Thread Tools
 
Search this Thread
 
Old Nov 6, 2005 | 09:48 PM
  #1  
nothingbutrotor's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: May 2005
Posts: 255
Likes: 0
From: oklahoma
Brake light won't go off

Like the title says, My brake light is on, and won't go off. I can pull the E-Brake, and set it back down, and it still stays on. It came on the other day while I was driving and hasn't went off since.

Anyone have any ideas what could be causing it?
Reply
Old Nov 6, 2005 | 09:50 PM
  #2  
Mazdax605's Avatar
79 GS,74 RE/PU
Tenured Member 15 Years
iTrader: (5)
 
Joined: Mar 2005
Posts: 1,584
Likes: 1
From: Massachusetts
Maybe the brake master cylinder is low on fluid.There is a float in there that turns on the light as well.
Reply
Old Nov 6, 2005 | 09:52 PM
  #3  
lovintha7's Avatar
Suicidal Death Missile
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 1,782
Likes: 0
From: Newport News, Virginia
Yep, check the master cylinder. If it's low, check for leaks. If you find no leaks, check your brake pads/shoes.

Also, the sensor for the e-brake could be stuck, but not likely.
Reply
Old Nov 6, 2005 | 09:56 PM
  #4  
nothingbutrotor's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: May 2005
Posts: 255
Likes: 0
From: oklahoma
Okay, I will check that tommorow. Now that I think about it, I noticed a lot of road-grime on the right-rear wheel, I just finished replacing the axle bearing on that side, so I had the brake caliper off. So it may be leaking from there.

But I also never hooked my e-brake back up when I put it all back together, it was being a pain so I just bailed on it. Could this have something to do with it?
Reply
Old Nov 6, 2005 | 10:07 PM
  #5  
nothingbutrotor's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: May 2005
Posts: 255
Likes: 0
From: oklahoma
Okay, just went out and went ahead and checked the level. It was low, about 1/4" above the "MIN" line, I put some fluid and filled it up all the way.

I had another question, but I forgot what it was.
Reply
Old Nov 6, 2005 | 10:19 PM
  #6  
boyee's Avatar
keep it original!!
Tenured Member: 20 Years
Liked
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,329
Likes: 8
From: SF Bay Area, California
yup yup i had the same problem and i seriously thought that it was my e-brake. i kept releasing it and pulling it back up so many times but nothing changed. while i was replacing my cmc i saw that the brake fluid in my bmc was low so i toped it off and the brake warning light went away. how stupid was i to not think of low brake fluid level? well now ive learned my lesson so in the future if my brake warning light is on and wont turn off i know where to look for first.
Reply
Old Nov 6, 2005 | 10:23 PM
  #7  
nothingbutrotor's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: May 2005
Posts: 255
Likes: 0
From: oklahoma
I will have to wait until tommorow before I know for sure, it's a tad late around here, and i'm sure my parents/people across the street wouldn't appreciate me making a lot of noise with my exhuast on a sunday night, especially the 'rents.

If this doesn't fix it, it will give me an excuse to buy parts, My bank account isn't struggling anymore, so I like excuses.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
fastsaab
New Member RX-7 Technical
5
Aug 19, 2015 11:42 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM




All times are GMT -5. The time now is 04:35 AM.