Boost Gauge Plumbing
#1
Go Hawks!
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: Cedar Rapids, Iowa
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Boost Gauge Plumbing
I want to put a boost gauge on my blown 13B. The sending unit that came with the gauge I bought looks just like the oil pressure sending unit, and is too big to use in the port that Camden said to use for this purpose (see attached picture). Can I mount the sending unit in a different location and run tubing or hose to it?
Thanks,
Rich
Thanks,
Rich
#3
Suicidal Death Missile
Join Date: Mar 2004
Location: Newport News, Virginia
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
You may be able to get an adapter, or something to turn it at 45* or 90*, whichever is easier to get to.
But yea, you can put it practically anywhere where you're going to get a boost signal.
But yea, you can put it practically anywhere where you're going to get a boost signal.
#5
Go Hawks!
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: Cedar Rapids, Iowa
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Electronic. I just need to know if I can mount the sending unit somewhere else in the engine compartment, and run hose or tubing to it from the blower manifold.
Thanks,
Rich
Thanks,
Rich
#6
I can has a Hemi? Yes...
iTrader: (2)
Originally Posted by 64mgb
Electronic. I just need to know if I can mount the sending unit somewhere else in the engine compartment, and run hose or tubing to it from the blower manifold.
Thanks,
Rich
Thanks,
Rich
I have my sending unit on the firewall, with a hose going to the intake.
#7
Go Hawks!
Thread Starter
iTrader: (1)
Join Date: May 2004
Location: Cedar Rapids, Iowa
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Directfreak
Sure you can,
I have my sending unit on the firewall, with a hose going to the intake.
I have my sending unit on the firewall, with a hose going to the intake.
Rich
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM