capri93

Alright im looking for a body kit that actualy replaces the stock frount fenders. not just ataches to them. Some thing that would look similer to Mireck 12A's blue wide body. btw nice car mireck.

capri93

27 veiws and no responce does this mean such a kit does not exist or no one has used such a kit>

RotaryRyan

ive never seen a kit like that.

85rotarypower

All widebody kits replace the front fenders. Any other kits just have stick/screw on pieces.

BigJim

yea, the rears are the ones that get moulded on usually. At least i believe cp racings does

85rotarypower

Mariahs and just about any other rear fenders mould on. The fronts are always replaced in a widebody kit.

capri93

Thank you you for that information with that knowledge i won't worry about fixing the frunt fenders i'll just replace them thanks guys.

85rotarypower

Just remember that the widebody fenders are of course wider than stock. Do you have a widebody kit on your car?

capri93

No not yet but i didnt want one if it just molded onto the front fenders i want to replace the fenders cuz they have rust. The rest of the car is for the most part rust free the storage bins the floors fender wells all clean just the lower edges of the fender are rusted.

85rotarypower

Ok, well no need to worry about rust there again if you get a widebody. All are made out of fiberglass (kind of obvious now that I think about it, since ALL body kits are fiberglass). I personally like the Mariah mode one kit the best. Next is CP racing if you want a really wild kit.

capri93

Where can i find these two kits i have seen the meriah, like that look and am really intersted in this add on.

85rotarypower

You can find the Mariah kit at www.mariahmotorsports.com . IMO, their kit is the best when the car is painted two tone, split top to bottom. You can see some pics of very nice cars on their site.

The CP racing kit can be found at www.cpracing.com . Their kit is VERY wild. I think with the mariah you can fit up to 8" rims on front and 8.5" rims on the back (not totally sure, its been a long time since I looked at it), but the CP racing kit can fit 9" rims in front I think and 10" rims on back. Absolutely massive.

Its a little harder than just an add on. You have to actually mould the rear fenders on using epoxy that they supply, then you have to repaint the car if you ever want it to look right.

BTW, those are rim widths.

capri93

yeah i kinda figured that was the width.

Lotus00

didnt some guy on the forum put 17x12's on his car? what body kit did he have?

edit: oh, yeah... those rims were unbeliveably massive. there were pics, but im too lazy to search

Unsupa

iTrader: (2)

that's http://www.cpracing.ca , not .com.

capri93

ok but they dont list there body kits on the sit for some reason or im just to supid to see them.

luiml73

iTrader: (1)

Any pics of this guy's car? I recall the name but not his car.

I think I know that guy

Capri........... is this what you're looking for?










BTW: My kit --------> Mariah and CPracing

capri93

That cp kits is sick i think i might go cp rear and mariah frunt. But damn thats gonna be a 3k upgrade to make it look right. Bolt patern coverters, wheels and tires, body kit, and new paint gonna be a while. I like the 13 car and the 92car.

luiml73

iTrader: (1)

wheels and tires $2500

capri93

I can get 17x7 -17x8 for under 900 with tires. but thats in 5x4.5 lug pattern.

85rotarypower

Oops, sorry about the website address. I couldn't remember exactly what it was at the time.

capri93

I e-mailed CPracing and the awsome wid body kit that they have on the white car on there site has been discontinued. WTF that pisses me off. Does anybody else make a wide body kit like the CP kit.

luiml73

iTrader: (1)

www.erebunicorp.com

capri93

Theres nothing even close on that site.

luiml73

iTrader: (1)

I ordered the Kit from them 2 years ago when My rear Flares where torn off by some drunk bitch. I have the Catalog at home and I'll post the part number.

It's been a while, so there's a chance they don't carry it any more just like CPracing.