Has anyone used this http://www.jegs.com/i/Flex-a-lite/400/3951/10002/-1 when removing the beehive oil cooler? If so, any luck? Work well?

I searched but no specific luck.

Thanks in advance,

-Jake

 

No it won't be adequate with our engines.

Search again as their is a major thread that discusses oil coolers but the bottom line is that our FMIC's off the 79-80, or 81-82 or 84-85 SE's are what you should be using or even the 2nd gen coolers.

Their is a write up on how to use 2nd gen coolers in the archives.

1st gen coolers are self explanatory as how to mount and use.

 

All I needed to know. I did find the write-up for the beehive removal/oil cooler swap while I was searching, just nothing specific to the flex-a-lite cooler. Thanks.