V.I.RXer

I just took my whole frigin dash apart and found out what was wrong with my choke. The frigin wire broke inside the lil electrical box. So i tried to detach the cable clamp inside the box and the 19yr old screws decided to seperate themselves from the head . So im thinkin it is no good anymore. Any suggestions other than mazda direct. I bet they will want an arm and a leg for the f*#@!n thing..... HELP PLS

Captain Lou

i tend to scavenge alot for mine

i didnt know you had to remove the dash to get at it?


i know its not helpful but basically thats teh cost,

you can spend it in money or time to get the part you need

nevarmore

Got pics? Is there enough screw left to get a dremel in there and cut a slot in it to get a flathead screwdriver to turn it? Is there enough room to drill the screw out?

Try Sears, the Craftsman screw-out set is gettnig decent reviews, but then again, if you cant get a drill in there you may not be able to get these in there.

dbtolman

I assume you are talking about the screws that hold the cover onto the Choke Magnet assembly?

Same issue w/ my 83... I used Red Green's favorite fix... DUCT TAPE!