Hey guys,
Im wondering if anyone knows where I can get a large amount of the stock sized brake hard/metal line, and the nuts that go on the connection ends of them (to the rubber lines and the master cylinder/prop valve)?

Even if someone knows the size of the hardline I can then look all over town for it. I need to completely redo my brake lines because im using a whole TII brake system including: brake booster, master cylinder, prop valve, calipers, rotors, hubs, SS brake lines etc...

Thanks
Dan_s_young

 

I bought my hard-brake lines for my rear axle swap through Blackdragon Automotive. They come preflanged with the correct flare nuts. You can get a variety of lengths to match each line that you are replacing, specifically. Really convenient!
(To see the hard-lines that I used, click on my sig, then go to page 4 of my cardomain site; then, select the 4th photo down.)

 

Holy crap, didn't even realize that, and you can get 60" for 5 bucks... Awesome!!! Thanks a million!

 

I got a roll of 25 feet at napa auto parts.. I re-used my fitting on the new line.. total cost was like 25.00. I replaced all the hardline in the car.

 

/chuckle
I sense sarcasm =)