Yes another Turbo Fb!!! The 12A streetport I had was good but I wanted more so I started my turbo swap in April.
Now for the Specs:
JDM S5 13b block
Streetported
Pinned
720/1600
Microtech LT-10s
T04S p-trim turbo 1.00A/R hot side .70A/R cold side

This is the motor and trans/ test fitting:


Wiring!!!!



Swaped to gsl-se suspension for these rims: lowering springs, tokico/KYB shocks, hawk pads all round


this is everything hooked up never started waiting to go for 3" mandrel bent stainless!!!


Finally this is how it sits:



I will be getting a video when it gets back from the local rotary shop. ECU had to get sent back for repair.... firing only 3 coils....Anyways will be getting tuned for 300hp. I will be joining the 400hp club in time. Thanks for looking!!!

 

Welcome to the Turbo FB club....
With power comes responsibility and LOSS of traction.....

L8R

 

Thanks and very very true haha.

 

Especially in the wet. The other day my car pretty much changed lanes on me as I went over a crest in the wet gunning it in 4th gear. I'm only using a little turbo too

I'm very keen to hear about boost response and how wide the power band is with that turbo.

 

well when i was driving it i was only shifting at 3500 and i was getting 4psi. I was like wow its already spooling with little throttle so i should hit full boost around 4500.

 

Looking good! Those are convertible wheels, aren't they? 205/50-15 in the front and 225/50-15 in the rear?

 

no they're a JDM wheel forgot the name. both 5-114.3 and 4-114.3, 16x7, 205/55/ front. 225/50 rear. +33 offset??