Altenator swap SA <--- FC
#1
Racingbeat dealer
Thread Starter
Join Date: Dec 2002
Location: Uden (AFB Volkel), The Netherlands
Posts: 787
Likes: 0
Received 1 Like
on
1 Post
Altenator swap SA <--- FC
I know there are many "altenator swap" threads, but no thread about swapping an altenator from an FC (70 Amps) onto a SA.
I've got the altenator without the buildin regulator, I was told to unplug the regulator connector and just install the FC altenator and correctly install the wires. The downside is that the voltmeter in the RPM guage does not work anymore. Can I jump the wires from the old regulator connector to get the voltmeter back to work again?
Anything else I have to check before I swap these Alts?
I don't have the choke anymore and enviromental stuff, It's just for the electric fan.
I've got the altenator without the buildin regulator, I was told to unplug the regulator connector and just install the FC altenator and correctly install the wires. The downside is that the voltmeter in the RPM guage does not work anymore. Can I jump the wires from the old regulator connector to get the voltmeter back to work again?
Anything else I have to check before I swap these Alts?
I don't have the choke anymore and enviromental stuff, It's just for the electric fan.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
gtcd
1st Generation Specific (1979-1985)
3
09-17-15 01:15 PM