AKRAY 12a Turbo kit on ebay, NEW!
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: winter park ,fl
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
AKRAY 12a Turbo kit on ebay, NEW!
check it out guys, those who are always saying they want to go turbo, heres your chance http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWA:IT
#5
I run this setup and it rocks....it was installed in 83 on my fb 81.....not sure I'm keeping the holley, but my setup came with the holley and the complete exhuast and sold for just under $2k back in 1983!
Trending Topics
#9
Full Member
Join Date: Sep 2004
Location: Sacramento,ca
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Something strikes me odd about this auction. He doesn't say a word about the turbo,and the picture is different. It looks like he stole that picture off a website or something and added to auction. Also, I dont know this, but does the kit look complete if turbo was included? For some reason, there are alot of pieces but it doesnt look like its all there.
I also found that his negative feedbacks were from INEXSPENSIVE items, not exspensive items...I checked the last 3 negative feedbacks that he got. 9.99$....interesting...but I dont trust the seller!
I also found that his negative feedbacks were from INEXSPENSIVE items, not exspensive items...I checked the last 3 negative feedbacks that he got. 9.99$....interesting...but I dont trust the seller!
#10
Racingbeat dealer
Join Date: Dec 2002
Location: Uden (AFB Volkel), The Netherlands
Posts: 787
Likes: 0
Received 1 Like
on
1 Post
This is only the "setup"
The turbo is not mentioned so has to be purchased seperate....
You can tell by the price and low reserve.
I also see some parts I can not place with the setup, example: the plenum... looks like things are missing or mis placed or the set is not complete, I wouldn't buy it if you do not have a same set or are familiar with it.
The turbo is not mentioned so has to be purchased seperate....
You can tell by the price and low reserve.
I also see some parts I can not place with the setup, example: the plenum... looks like things are missing or mis placed or the set is not complete, I wouldn't buy it if you do not have a same set or are familiar with it.
#12
Gentlemen...
Dont waste your time with this set-up..... is crap!
Do like I did.....
FOR 12A TURBO
Fabricate your own. Believe it or not...Is pretty simple....
To fabricate a Turbo manifold......first, get a 12A exhaust Flange from Racing Beat also get the gasket.
Second.... go to EBAY.COM and get this 13B Turbo Manifold(93-95 RX7): http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 ....
Next.... Cut the tip/corners of the 13b flange bolt holes..... place the new 12A flange ON TOP and TIG WELD it..... See this picture:
Finally... get the Turbo and Wastegate.
For the Turbo.... I got a medium size one ( Garrett T4E, .60 compressor, .69 Turbine, P Trim ) I paid about 500 for it.
NOTE: YOU MUST port ( at least ...mild street porting ) your engine.
Total cost (FOR THE TURBO SET-UP) is around $1,000 by doing it yourself.... and over $2,000 if done at a shop.
You will get around 250 horse power at the wheels @ 10 PSI Boost ( with selected Turbo and MILD STREET PORTING)
LIST:
Exhaust Flange
Exhaust Gasket
13B Turbo Manifold
T4 Turbo w bolts, oil line, return line & gaskets
HKS WASTEGATE with gasket
Blow off valve
Intercooler with pipping & silicone hoses
Boost controler ( Turbonetics 10 PSI MAX )
Boost gauge
Heat/exhaust wrap
If carburetor/holley... Turbonetics carburetor cover/hat (blow thru)
If carburetor/holley... use Racing Beat Intake Manifold ( PORTED )
Air Filter ( K&N or Aftermarket )
3 " Downpipe with presilencer & good muffler
a new fuel pump ( should push at least 16 to 25 psi )
and Regulator
Fuel and Air Gauge ( make sure is at least 4 " from turbo on downpipe )
optinal: Turbo timer
GOOD LUCK to anyone trying this...
Dont waste your time with this set-up..... is crap!
Do like I did.....
FOR 12A TURBO
Fabricate your own. Believe it or not...Is pretty simple....
To fabricate a Turbo manifold......first, get a 12A exhaust Flange from Racing Beat also get the gasket.
Second.... go to EBAY.COM and get this 13B Turbo Manifold(93-95 RX7): http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 ....
Next.... Cut the tip/corners of the 13b flange bolt holes..... place the new 12A flange ON TOP and TIG WELD it..... See this picture:
Finally... get the Turbo and Wastegate.
For the Turbo.... I got a medium size one ( Garrett T4E, .60 compressor, .69 Turbine, P Trim ) I paid about 500 for it.
NOTE: YOU MUST port ( at least ...mild street porting ) your engine.
Total cost (FOR THE TURBO SET-UP) is around $1,000 by doing it yourself.... and over $2,000 if done at a shop.
You will get around 250 horse power at the wheels @ 10 PSI Boost ( with selected Turbo and MILD STREET PORTING)
LIST:
Exhaust Flange
Exhaust Gasket
13B Turbo Manifold
T4 Turbo w bolts, oil line, return line & gaskets
HKS WASTEGATE with gasket
Blow off valve
Intercooler with pipping & silicone hoses
Boost controler ( Turbonetics 10 PSI MAX )
Boost gauge
Heat/exhaust wrap
If carburetor/holley... Turbonetics carburetor cover/hat (blow thru)
If carburetor/holley... use Racing Beat Intake Manifold ( PORTED )
Air Filter ( K&N or Aftermarket )
3 " Downpipe with presilencer & good muffler
a new fuel pump ( should push at least 16 to 25 psi )
and Regulator
Fuel and Air Gauge ( make sure is at least 4 " from turbo on downpipe )
optinal: Turbo timer
GOOD LUCK to anyone trying this...
#13
Registered Offender
Join Date: Jun 2003
Location: Ohio
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ssglopezvm
Gentlemen...
Dont waste your time with this set-up..... is crap!
Do like I did.....
FOR 12A TURBO
Fabricate your own. Believe it or not...Is pretty simple....
To fabricate a Turbo manifold......first, get a 12A exhaust Flange from Racing Beat also get the gasket.
Second.... go to EBAY.COM and get this 13B Turbo Manifold(93-95 RX7): http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 ....
Next.... Cut the tip/corners of the 13b flange bolt holes..... place the new 12A flange ON TOP and TIG WELD it..... See this picture:
Finally... get the Turbo and Wastegate.
For the Turbo.... I got a medium size one ( Garrett T4E, .60 compressor, .69 Turbine, P Trim ) I paid about 500 for it.
NOTE: YOU MUST port ( at least ...mild street porting ) your engine.
Total cost (FOR THE TURBO SET-UP) is around $1,000 by doing it yourself.... and over $2,000 if done at a shop.
You will get around 250 horse power at the wheels @ 10 PSI Boost ( with selected Turbo and MILD STREET PORTING)
LIST:
Exhaust Flange
Exhaust Gasket
13B Turbo Manifold
T4 Turbo w bolts, oil line, return line & gaskets
HKS WASTEGATE with gasket
Blow off valve
Intercooler with pipping & silicone hoses
Boost controler ( Turbonetics 10 PSI MAX )
Boost gauge
Heat/exhaust wrap
If carburetor/holley... Turbonetics carburetor cover/hat (blow thru)
If carburetor/holley... use Racing Beat Intake Manifold ( PORTED )
Air Filter ( K&N or Aftermarket )
3 " Downpipe with presilencer & good muffler
a new fuel pump ( should push at least 16 to 25 psi )
and Regulator
Fuel and Air Gauge ( make sure is at least 4 " from turbo on downpipe )
optinal: Turbo timer
GOOD LUCK to anyone trying this...
Dont waste your time with this set-up..... is crap!
Do like I did.....
FOR 12A TURBO
Fabricate your own. Believe it or not...Is pretty simple....
To fabricate a Turbo manifold......first, get a 12A exhaust Flange from Racing Beat also get the gasket.
Second.... go to EBAY.COM and get this 13B Turbo Manifold(93-95 RX7): http://cgi.ebay.com/ebaymotors/ws/eB...category=33742 ....
Next.... Cut the tip/corners of the 13b flange bolt holes..... place the new 12A flange ON TOP and TIG WELD it..... See this picture:
Finally... get the Turbo and Wastegate.
For the Turbo.... I got a medium size one ( Garrett T4E, .60 compressor, .69 Turbine, P Trim ) I paid about 500 for it.
NOTE: YOU MUST port ( at least ...mild street porting ) your engine.
Total cost (FOR THE TURBO SET-UP) is around $1,000 by doing it yourself.... and over $2,000 if done at a shop.
You will get around 250 horse power at the wheels @ 10 PSI Boost ( with selected Turbo and MILD STREET PORTING)
LIST:
Exhaust Flange
Exhaust Gasket
13B Turbo Manifold
T4 Turbo w bolts, oil line, return line & gaskets
HKS WASTEGATE with gasket
Blow off valve
Intercooler with pipping & silicone hoses
Boost controler ( Turbonetics 10 PSI MAX )
Boost gauge
Heat/exhaust wrap
If carburetor/holley... Turbonetics carburetor cover/hat (blow thru)
If carburetor/holley... use Racing Beat Intake Manifold ( PORTED )
Air Filter ( K&N or Aftermarket )
3 " Downpipe with presilencer & good muffler
a new fuel pump ( should push at least 16 to 25 psi )
and Regulator
Fuel and Air Gauge ( make sure is at least 4 " from turbo on downpipe )
optinal: Turbo timer
GOOD LUCK to anyone trying this...
sorry for the hijack
#15
Rotary Enthusiast
Join Date: Mar 2003
Location: LOS ANGELES
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
The bidding ended at $610. I truly think this guy misrepresented the product. The buyer got raped. All he's getting is a wastegate, intake manifold and some pipes!!
#18
Super Moderator
iTrader: (3)
According to the questions asked to the seller, it has everything except for the Holley and the exhaust manifold. However, he is not very clear on the turbo itself.
Q: will this work with a carbarated engine? Answered on Oct-27-04
A: YES IT WILL BUT YOU WILL HAVE TO CONVERT OVER TO HOLLEY FOR THE RIGHT PERFORMANCE CAR WILL BLOW ANY VETTE PORCHE OR 5.0 OFF THE ROAD BY MANY CAR LENGTHS..........
Q: is there a web site with information about this product. I have an 82 that I may want to put it on if it is not to hard or doesn't require many more parts Answered on Oct-27-04
A: IT ISNT A 1-2 JOB IT WILL TAKE SOME TIME THE AKRAY TURBO IS BRAND NEW BUT CAME OUT ALONG TIME AGO BY A NASA ENGENER.
Q: hey mate i live in australia and really want to bid on this item would you ship to australia at my expense if you would that would be very much apretiated thanks. steven Answered on Oct-27-04
A: YES IF YOU PAY THE EXRA SHIPPING AND MY TRIP TO THE SHIPER THANKS,MATE,ROB.
Q: Are installation instructions included and Would you consider shipping turbo kit to Winnipeg, Canada R3P-0S8 if successful bidder. Thx in advance Answered on Oct-27-04
A: I WILL SHIP TO CANADA FOR A FEW MORE DOLLARS.ARE YOU THE 0 FEEDBACK BIDDER??
Q: will this fit on a 79 12a motor. How hard is it to install. please email me at the_bert6969@yahoo.com thanks Answered on Oct-24-04
A: IT IS A JOB TO INSTALL..
Q: How much to ship? what kind of turbo comes with the kit? where in cleveland do you live? please let me know... thanks!! Answered on Oct-22-04
A: I WILL ONLY SHIP THIS ITEM.I PAID WELL OVER 700.00 DOLLARS FOR IT SO SHIPPING IS A FLAT RATE.
Q: Is this complete with manifolds? Thanks, Michael Answered on Oct-22-04
A: IT IS COMPLETE MINUS THE ACTUAL HOLLEY CARB AND THE TURBO EXUAST SOLD SEPERATE.
Q: Hi- Please tell me what is included. I can identify carb mount to turbo--for Holley? What are the other two cast alum pieces? Boost gauge, hoses,gaskets,etc. What is wrapped in brown paper? No turbo or manifold? Thanks, Len Answered on Oct-22-04
A: ALL TURBO PARTS ARE INCLUDED EVERYTHING YOU SEE IN PICTURES AND THE ACTUAL TURBO UNIT INTAKE IS THERE TO TURBO GUAGE LINES GASKETS CLAMPS BUT NO HOLLEY SOLD SEPERATE..
-Kent
Q: will this work with a carbarated engine? Answered on Oct-27-04
A: YES IT WILL BUT YOU WILL HAVE TO CONVERT OVER TO HOLLEY FOR THE RIGHT PERFORMANCE CAR WILL BLOW ANY VETTE PORCHE OR 5.0 OFF THE ROAD BY MANY CAR LENGTHS..........
Q: is there a web site with information about this product. I have an 82 that I may want to put it on if it is not to hard or doesn't require many more parts Answered on Oct-27-04
A: IT ISNT A 1-2 JOB IT WILL TAKE SOME TIME THE AKRAY TURBO IS BRAND NEW BUT CAME OUT ALONG TIME AGO BY A NASA ENGENER.
Q: hey mate i live in australia and really want to bid on this item would you ship to australia at my expense if you would that would be very much apretiated thanks. steven Answered on Oct-27-04
A: YES IF YOU PAY THE EXRA SHIPPING AND MY TRIP TO THE SHIPER THANKS,MATE,ROB.
Q: Are installation instructions included and Would you consider shipping turbo kit to Winnipeg, Canada R3P-0S8 if successful bidder. Thx in advance Answered on Oct-27-04
A: I WILL SHIP TO CANADA FOR A FEW MORE DOLLARS.ARE YOU THE 0 FEEDBACK BIDDER??
Q: will this fit on a 79 12a motor. How hard is it to install. please email me at the_bert6969@yahoo.com thanks Answered on Oct-24-04
A: IT IS A JOB TO INSTALL..
Q: How much to ship? what kind of turbo comes with the kit? where in cleveland do you live? please let me know... thanks!! Answered on Oct-22-04
A: I WILL ONLY SHIP THIS ITEM.I PAID WELL OVER 700.00 DOLLARS FOR IT SO SHIPPING IS A FLAT RATE.
Q: Is this complete with manifolds? Thanks, Michael Answered on Oct-22-04
A: IT IS COMPLETE MINUS THE ACTUAL HOLLEY CARB AND THE TURBO EXUAST SOLD SEPERATE.
Q: Hi- Please tell me what is included. I can identify carb mount to turbo--for Holley? What are the other two cast alum pieces? Boost gauge, hoses,gaskets,etc. What is wrapped in brown paper? No turbo or manifold? Thanks, Len Answered on Oct-22-04
A: ALL TURBO PARTS ARE INCLUDED EVERYTHING YOU SEE IN PICTURES AND THE ACTUAL TURBO UNIT INTAKE IS THERE TO TURBO GUAGE LINES GASKETS CLAMPS BUT NO HOLLEY SOLD SEPERATE..
-Kent
#19
Rotoholic Moderookie
iTrader: (4)
Even if I was interested and I had the money, I find it very hard to bid on something so poorly put together. Especially for a sale so expensive. He types all in caps, and only includes two flaky pictures. He doesn't include all the specific information someone would want when buying a setup like this.
I find it flakey.
Jon
I find it flakey.
Jon
#20
Rotary Enthusiast
Join Date: Mar 2003
Location: LOS ANGELES
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
Q: Hi- Please tell me what is included. I can identify carb mount to turbo--for Holley? What are the other two cast alum pieces? Boost gauge, hoses,gaskets,etc. What is wrapped in brown paper? No turbo or manifold? Thanks, Len Answered on Oct-22-04
A: ALL TURBO PARTS ARE INCLUDED EVERYTHING YOU SEE IN PICTURES AND THE ACTUAL TURBO UNIT INTAKE IS THERE TO TURBO GUAGE LINES GASKETS CLAMPS BUT NO HOLLEY SOLD SEPERATE..
I don't know. I don't see the exh manifold in the picture and he doesn't actually say he has the turbo??
A: ALL TURBO PARTS ARE INCLUDED EVERYTHING YOU SEE IN PICTURES AND THE ACTUAL TURBO UNIT INTAKE IS THERE TO TURBO GUAGE LINES GASKETS CLAMPS BUT NO HOLLEY SOLD SEPERATE..
I don't know. I don't see the exh manifold in the picture and he doesn't actually say he has the turbo??
Thread
Thread Starter
Forum
Replies
Last Post