Aftermarket driveshaft u-joint. 83-85 5speed.
#1
Senior Member
Thread Starter
Join Date: Sep 2005
Location: GA
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket driveshaft u-joint. 83-85 5speed.
I have acquired a used aftermarket driveshaft with replaceable u-joints. It would be great to replace the u-joints as one of them has a broken grease fitting, and the rubber boot/seals are cracking. The driveshaft came from a 1983 model.
Does anyone have part numbers? Or better yet know of a vehicle that uses those u-joints?
Does anyone have part numbers? Or better yet know of a vehicle that uses those u-joints?
#2
Senior Member
iTrader: (1)
Join Date: Mar 2006
Location: Texas
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
I have acquired a used aftermarket driveshaft with replaceable u-joints. It would be great to replace the u-joints as one of them has a broken grease fitting, and the rubber boot/seals are cracking. The driveshaft came from a 1983 model.
Does anyone have part numbers? Or better yet know of a vehicle that uses those u-joints?
Does anyone have part numbers? Or better yet know of a vehicle that uses those u-joints?
#3
Senior Member
Thread Starter
Join Date: Sep 2005
Location: GA
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
At the time of that post I thought I had an aftermarket shaft, and through research I think they use an old school mopar Spicer. After removing the joint and measured I found out I have a factory shaft that's had 430-10a joints replaced. I ordered some, problem solved.
Thanks for the help, but disregard the post anyway.
Thanks for the help, but disregard the post anyway.
Thread
Thread Starter
Forum
Replies
Last Post