Advice on Fuel Sytem Upgrade needed
#1
Lives on the Forum
Thread Starter
Advice on Fuel Sytem Upgrade needed
Thanks in advance for any advice guys....
I understand that the typical choices are the Walbro fuel pump with a Holley fuel pressure regulator when it comes to upgrading. But a couple of questions...
1. Where's the best (read "cheapest") place to order these.
2. Who makes a fuel pressure gauge that will actually read accurately at low pressures like ours.
I am making this upgrade because I seem to be a little lean at higher RPMs, and in preparation for a Sterling carb (hopefully this summer).
I'm going to enter my 1st Auto-X in 3 weeks, so I really would like to get this done. Thanks again for any help/advice...
I understand that the typical choices are the Walbro fuel pump with a Holley fuel pressure regulator when it comes to upgrading. But a couple of questions...
1. Where's the best (read "cheapest") place to order these.
2. Who makes a fuel pressure gauge that will actually read accurately at low pressures like ours.
I am making this upgrade because I seem to be a little lean at higher RPMs, and in preparation for a Sterling carb (hopefully this summer).
I'm going to enter my 1st Auto-X in 3 weeks, so I really would like to get this done. Thanks again for any help/advice...
#2
Lorem ipsum dolor sit ame
Do a search n00b!
With that out of the way, summitracing is a good place to order. On an accurate gauge, buy it from yawpower.com. Not cheap, but accurate.
With that out of the way, summitracing is a good place to order. On an accurate gauge, buy it from yawpower.com. Not cheap, but accurate.
#6
Lives on the Forum
Thread Starter
Well, I'm gonna have to take that back I think. I just went to Yawpower and I have read that article before, but no exact info on what type to get. He just goes on about how important it is to use an accurate gauge, which is why I posted this thread.
I'm looking for a specific model or a link if possible. But the gauge HAS to be accurate at these pressures, just like Yaw states...
I'm looking for a specific model or a link if possible. But the gauge HAS to be accurate at these pressures, just like Yaw states...
Trending Topics
#9
Lives on the Forum
Thread Starter
Originally Posted by jays83gsl
Evil Motors, you noob, if you would have done a search, you would have known why Carlos said to do a search. NOOB!
Yeah, I seem to help Carlos out with invaluable information and he thanks me by calling me noob! Well, then again now that I think about it it's kind of a two way street....
Carlos, don't call back until you've got something I can use!
#11
Lorem ipsum dolor sit ame
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM