1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

accelaration problem? help!!!

Thread Tools
 
Search this Thread
 
Old Oct 1, 2003 | 11:08 AM
  #1  
rneoaz82's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 103
Likes: 0
From: Arizona
accelaration problem? help!!!

My 83 sucks when it comes to speed!! In 1st gear its ok, but the rest are even worse. This weird rattling noise comes out of the tranny or engine when im flooring it and the rpms pass 3500. Its so bad that i cant even pass cars on the highway. The car only goes up to 65 mph and even drops by itself to 60 with the pedal to the floor. Guys you gotta help this really sucks!!

It cant be the fuel filter because its new, or the spark plugs. My front and rear fuel bowls on the carb are at a quarter from full. I heard that they should only be at half way. One more thing is there like a filter in the carb or somewhere that may lack speed?
Reply
Old Oct 1, 2003 | 12:25 PM
  #2  
Sterling's Avatar
Nikki-Modder Rex-Rodder
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 2,890
Likes: 14
From: Trying to convince some clown not to put a Holley 600 on his 12a.
Sounds like your secondaries may not be opening.
Perhaps the saftey throttle return spring has flipped off the rocker. PM Carl for more info on this, as I have limited experience. (I always rip those things right off first thing!)
The float bowl sight glasses are supposed to show half-full during idle. 1/4 from top is not going to have the effect that you describe, though.
The fact that first gear is "OK" demonstrates that the mixture is on for that gear. But when you apply significant load (second & higher gears), you're coming up short of fuel in the mixture.

Check that return spring gizmo, and get back to us.
Reply
Old Oct 1, 2003 | 02:13 PM
  #3  
rneoaz82's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 103
Likes: 0
From: Arizona
i gotta check that if my secondaries are opening, but how do you mess with the mixture. I have no clue on where that might be. Where is this return spring at?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 03:13 AM.