ac problem

Reply Subscribe

Thread Tools

Search this Thread

Jun 12, 2003 | 04:47 AM

lenh

Thread Starter

Full Member

Joined: Nov 2001

Posts: 62

Likes: 0

From: cordele ga

ac problem

my 85 has always had low air volume coming threw vents when ac or heater is used recently put new blower motor in car still little air coming from vents it blows just not what it should be has anyone found fix for this i know lot of people with 1st gen have this concern

Jun 12, 2003 | 03:41 PM

Tripple 7's

Senior Member

Joined: Jun 2003

Posts: 318

Likes: 38

From: Tempe, AZ

a/c

Check the gasket/foam seal under the metal band holding the blower motor asembly to the evaporator box. It is located to the left of the blower motor. If the gasket/foam seal is missing or disintigrated the blower motor air will bleed off and not progress through the ductwork.

Jun 12, 2003 | 11:35 PM

mechgod

Building Motors

Joined: Jun 2003

Posts: 20

Likes: 0

From: Santa Clarita, CA.

there could also be build up of junk in front of the evap and heater core

Jun 13, 2003 | 01:32 AM

Pittdp

Senior Member

Joined: Apr 2001

Posts: 561

Likes: 0

From: Arlington, TX, USA

Re: a/c

Quote:

Originally posted by Tripple 7's
Check the gasket/foam seal under the metal band holding the blower motor asembly to the evaporator box. It is located to the left of the blower motor. If the gasket/foam seal is missing or disintigrated the blower motor air will bleed off and not progress through the ductwork.

I had the samething happen to me I re-sealed it and the air flow was much greater.