8813b in 83 gs
10-07-03, 02:21 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2002
Location: Hampton, VA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
8813b in 83 gs
I'm looking at putting an 88 13b in an 83 gs. I know I need the front cover off a 12a and I'll get the RB Crossmember along w/ new motormounts.
I'll need a 6-port adapter plate from RB as well correct? Any other parts I'll need to source from the 12a for this motor?
The 88 motor is a complete longblock, I'll be removing ac and PS... and selling the manifolds since I'll be installing a header and a carb.
Umm... yea anything else? I've been searching and all I see is 13bt info...
oh yea, i'll be getting the carter pump, a regulator and fuel pressure gauge too... almost forgot about those...
probably a RB intake manifold for a dellorto/weber/mikuni
I'll need a 6-port adapter plate from RB as well correct? Any other parts I'll need to source from the 12a for this motor?
The 88 motor is a complete longblock, I'll be removing ac and PS... and selling the manifolds since I'll be installing a header and a carb.
Umm... yea anything else? I've been searching and all I see is 13bt info...
oh yea, i'll be getting the carter pump, a regulator and fuel pressure gauge too... almost forgot about those...
probably a RB intake manifold for a dellorto/weber/mikuni
Last edited by mr_ouija; 10-07-03 at 02:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post