85 GSL-SE idle problem
11-25-09, 07:12 PM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Jul 2008
Location: ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
85 GSL-SE idle problem
Hello,
I have a 1985 GSL-SE rx7 with the 13b from factory. My idle use to surge reel bad from 1000 to 2000. So I took the throttle body apart and cleaned it out and then I replaced the TPS because the old one was bad. Then it still surged so I unplugged the two valves that controlled the bac valve and ran great but still surged but not as bad. So I took the bac valve off and I mad a block off plate with a gasket and now it only surges about once a day. What else could make it do this?
Thanks
I have a 1985 GSL-SE rx7 with the 13b from factory. My idle use to surge reel bad from 1000 to 2000. So I took the throttle body apart and cleaned it out and then I replaced the TPS because the old one was bad. Then it still surged so I unplugged the two valves that controlled the bac valve and ran great but still surged but not as bad. So I took the bac valve off and I mad a block off plate with a gasket and now it only surges about once a day. What else could make it do this?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM
