84 rx7 front wheel bearings
#4
callin' tokyo
Join Date: Dec 2002
Location: Windsor, Ontario
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Unscrew the caliper at the bottom. Swing it up and then off. Hang it on the spring.
Remove the dust cap, remove the cotter pin. unscrew the nut and pull the disk off.
Take the 2 bearings, 2 chases and the oil seal off.
You need to tell us what is wrong though. Do you have a vibration, a 'woo woo' noise? Are you having problems removing the chase?
Have you downloaded the service manual?
You may want to replace the brake disk while you're there.
Remove the dust cap, remove the cotter pin. unscrew the nut and pull the disk off.
Take the 2 bearings, 2 chases and the oil seal off.
You need to tell us what is wrong though. Do you have a vibration, a 'woo woo' noise? Are you having problems removing the chase?
Have you downloaded the service manual?
You may want to replace the brake disk while you're there.
Thread
Thread Starter
Forum
Replies
Last Post
GrossPolluter
Suspension/Wheels/Tires/Brakes
12
08-15-15 10:32 PM
tallbozo
1st Generation Specific (1979-1985)
3
08-15-15 02:47 PM