ok. so my 82s was missing the orance vac sylenoid when i bought it. i figured no prob...i got an 83 GS at home that has the sylenoid right? well, i hooked it up but i still have an extra vaccuum line that i had to cap off. if you are standing on the drivers fender side of the car and look at it you have one line from the sylenoid to the lines....fairly simple....no problems connecting that....only one....but on the pass side of the sylenoid i have 2 lines....one on the left side of the release valve for the sylenoid.....and one on the right.......im assuming that i connect the sylenoid the the line on the left (toward the front of the engine) but what do i do with the vac line on the right? i would look at the sticker on the hood, but the previous owner replaced the hood with a hood from an 85 so the diagram does me no good. my hayes manual doesn't show a good diagram for what im looking at either, or if they do i just don't see one that looks like my setup. if it helps i have the 12a with the side mount oil filter instead of the beehive. thanks in advance for the help guys.

 

bump