1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

82 oil leak

Thread Tools
 
Search this Thread
 
Old Oct 17, 2001 | 04:35 PM
  #1  
kidski's Avatar
Thread Starter
Newbie
 
Joined: Oct 2001
Posts: 2
Likes: 0
From: Kansas
82 oil leak

Just bought 93 GSL w/82 engine. Getting oil on top of the engine between the oil filler tube and the oil filter area. Is this a common problem with the RX-7? Is it likely that this is leaking between the housings? Can't get it to show at idle sitting still but have a puddle after driving a mile or so getting to 5k rpm.

Andy
Reply
Old Oct 18, 2001 | 08:57 AM
  #2  
jimmyv13's Avatar
Round&Round not Up&Down
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
Re: 82 oil leak

Originally posted by kidski
Just bought 93 GSL w/82 engine. Getting oil on top of the engine between the oil filler tube and the oil filter area. Is this a common problem with the RX-7? Is it likely that this is leaking between the housings? Can't get it to show at idle sitting still but have a puddle after driving a mile or so getting to 5k rpm.

Andy
I'm sure you mean 83 GSL ..... I don't believe Mazda mada a 93 GSL.

Anyway, any oil leaking is a problem, common or not. The oil is leaking under load and not idle. Sounds bad, possible seal between the housings. Clean the engine completely with Engine Brite, especially the area where you are talking. Go for a quick 1/2 mile drive, be sure to get the revs up. Go home and search for the leak. The first thing is finding out exactly where the leak is coming from. Hopefully it's a loose filter.


Are there oil coolers on '82, if so check the oil lines around that.
Reply
Old Oct 18, 2001 | 12:08 PM
  #3  
kidski's Avatar
Thread Starter
Newbie
 
Joined: Oct 2001
Posts: 2
Likes: 0
From: Kansas
oil leak

Yes....it is 83 not 93. Oil appears to be coming out between the housings.....guess I get to pull the motor.....

Andy
Reply
Old Oct 19, 2001 | 10:27 PM
  #4  
jimmyv13's Avatar
Round&Round not Up&Down
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
Now is the perfect time to get it ported. Might as well get the intake manifold done too.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM
sypath
3rd Generation Specific (1993-2002)
2
Aug 16, 2015 12:06 AM




All times are GMT -5. The time now is 06:47 AM.