81 Won't pass calif smog
#1
Newbie
Thread Starter
Join Date: Nov 2002
Location: San Francisco
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
81 Won't pass calif smog
I have a 81 that recently had a motor change from a 80 RX-7 with 50k on it. It runs fine but won't pass smog. All of the 81 smog equipment was attached to the 80 motor with the extra air ports on the block blanked off. I have the readings at idle and high speed. I wonder based on the readings, can anyone tell me if I need a cat, carb, etc. It has been tuned up recently. Here are the readings: AT IDLE; H.C. 650ppm, CO% .70%, CO2 13.60, 02 .96, NOX 58PPM... High Speed; H.C. 340ppm, CO% 1.10%, CO2 13.10, 02 .96, NOX 68ppm... I really don't want to get rid of it, it's really clean, and runs well, but just won't pass that dam Ca. smog...thank alot...Mike
#3
Newbie
Thread Starter
Join Date: Nov 2002
Location: San Francisco
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
about 10-15k ago...It was the same cat after market single (took off the other one years ago with no smog problems before) that was on the car when the first motor blew a Plate (head) gasket...
#4
Rotary Freak
iTrader: (1)
Join Date: Feb 2002
Location: NJ
Posts: 2,693
Likes: 0
Received 0 Likes
on
0 Posts
Couldn't have blown a head gasket, but maybe an oil seal or apex seal maybe?
Make sure the carb is tuned correctly. The Haynes manual has a good description on how to tune the carb to meet EPA standards.
Make sure the carb is tuned correctly. The Haynes manual has a good description on how to tune the carb to meet EPA standards.
#5
Amish Gangsta
Join Date: Dec 2001
Location: Woodland Hills, CA
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Check your air control valve....
Mine is shot do I put a cork in the retun to the air filter. All the air now has to go into the cat, making a better burn.
check it out, It's worked for me 2 times now....
Mine is shot do I put a cork in the retun to the air filter. All the air now has to go into the cat, making a better burn.
check it out, It's worked for me 2 times now....
#6
Gone Race'n
iTrader: (4)
Join Date: Dec 2001
Location: Rockford, IL
Posts: 1,544
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by breesej
Check your air control valve....
Mine is shot do I put a cork in the retun to the air filter. All the air now has to go into the cat, making a better burn.
check it out, It's worked for me 2 times now....
Check your air control valve....
Mine is shot do I put a cork in the retun to the air filter. All the air now has to go into the cat, making a better burn.
check it out, It's worked for me 2 times now....
Ryan
#7
So what are the limits for your No and HC? Which one is failing? Those numbers look good compared to what my last car passed at. I think my MX-6 was good at 1000 and 250 for HC and NO, so I can't understand why your failing?
Trending Topics
#8
Got Boost?
Whoa 1000 ppm and they pass it??? I and I thought CA was the smog-**** state. Here they'll fail ya with over 220 ppm HC. Of course the visual isn't as tight, and the people I go to let me superheat the cat (try reving it to 4k, and keeping it there for about 20-30 min, right before the inspection, or go for a nice long drive) I got my 85 to pass with 127 ppm HC at idle, and 15 ppm at cruise on a dying cat (it cracked and clogged 2 months later), I don't remember my CO, but it seems to be about what you have.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM