3 rotor build!
#26
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,835
Received 2,604 Likes
on
1,847 Posts
the good news is that Mazda has done 4 rotors, so some of the guesswork has been done, like the firing order and such. you can also use normal 13B rotors and rotor housings.
the bad news is that you still need to do quite a lot of custom fabrication and machining.
#28
premix, for f's sake
iTrader: (6)
I wish I had tens of thousands of dollars for my dream 20b swap...
RB Aluminum "irons" <----lolz, ironic huh?
pinned and studded w/ oversized studs
FD PP housings
Kiwi-RE 20b e-shaft
Mazdatrix titanium rotors
MFR dry sump front cover
NRS ceramic seals
Inconel header w/ tuned long primaries (why the **** not? I can dream)
MOTEC M880
Mazdaspeed 3.9lb racing flywheel & 5.5" dual disc clutch
...
if I ever win a serious money lottery, I promise.... it will be known, and the world will see the most bad ***, "WTF are you serious?", NA 3 rotor EVER
RB Aluminum "irons" <----lolz, ironic huh?
pinned and studded w/ oversized studs
FD PP housings
Kiwi-RE 20b e-shaft
Mazdatrix titanium rotors
MFR dry sump front cover
NRS ceramic seals
Inconel header w/ tuned long primaries (why the **** not? I can dream)
MOTEC M880
Mazdaspeed 3.9lb racing flywheel & 5.5" dual disc clutch
...
if I ever win a serious money lottery, I promise.... it will be known, and the world will see the most bad ***, "WTF are you serious?", NA 3 rotor EVER
#30
HeyHeyHey..Its the Goose
iTrader: (3)
I wish I had tens of thousands of dollars for my dream 20b swap...
RB Aluminum "irons" <----lolz, ironic huh?
pinned and studded w/ oversized studs
FD PP housings
Kiwi-RE 20b e-shaft
Mazdatrix titanium rotors
MFR dry sump front cover
NRS ceramic seals
Inconel header w/ tuned long primaries (why the **** not? I can dream)
MOTEC M880
Mazdaspeed 3.9lb racing flywheel & 5.5" dual disc clutch
...
if I ever win a serious money lottery, I promise.... it will be known, and the world will see the most bad ***, "WTF are you serious?", NA 3 rotor EVER
RB Aluminum "irons" <----lolz, ironic huh?
pinned and studded w/ oversized studs
FD PP housings
Kiwi-RE 20b e-shaft
Mazdatrix titanium rotors
MFR dry sump front cover
NRS ceramic seals
Inconel header w/ tuned long primaries (why the **** not? I can dream)
MOTEC M880
Mazdaspeed 3.9lb racing flywheel & 5.5" dual disc clutch
...
if I ever win a serious money lottery, I promise.... it will be known, and the world will see the most bad ***, "WTF are you serious?", NA 3 rotor EVER
#31
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,835
Received 2,604 Likes
on
1,847 Posts
I wish I had tens of thousands of dollars for my dream 20b swap...
RB Aluminum "irons" <----lolz, ironic huh?
pinned and studded w/ oversized studs
FD PP housings
Kiwi-RE 20b e-shaft
Mazdatrix titanium rotors
MFR dry sump front cover
NRS ceramic seals
Inconel header w/ tuned long primaries (why the **** not? I can dream)
MOTEC M880
Mazdaspeed 3.9lb racing flywheel & 5.5" dual disc clutch
...
if I ever win a serious money lottery, I promise.... it will be known, and the world will see the most bad ***, "WTF are you serious?", NA 3 rotor EVER
RB Aluminum "irons" <----lolz, ironic huh?
pinned and studded w/ oversized studs
FD PP housings
Kiwi-RE 20b e-shaft
Mazdatrix titanium rotors
MFR dry sump front cover
NRS ceramic seals
Inconel header w/ tuned long primaries (why the **** not? I can dream)
MOTEC M880
Mazdaspeed 3.9lb racing flywheel & 5.5" dual disc clutch
...
if I ever win a serious money lottery, I promise.... it will be known, and the world will see the most bad ***, "WTF are you serious?", NA 3 rotor EVER
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 11:02 PM