pimpncuba

i have an 84 -se. what would i need to do to put a stock turbo II turbo on my car? could i pull this off relatively cheaply?

seanrot

iTrader: (2)

First answer is in the box below second question is yes

rx7_freek

LMFAO...NICE response!

pimpncuba

a quick and easy answer would have been nice. i guess i will search it

seanrot

iTrader: (2)

NO quick easy answer on that one, there is a write up in the archives you should look at.

That answer was quick and easy for me good luck

faye x7

Well, he wasn't asking how to do it, was just asking how much it'd cost based on the experience of others. Sometimes I wonder if I'm dealing with FD owners or FB owners in this forum. (No offense to those FD owners, I know not all of you are ******)

seanrot

iTrader: (2)

The large print portion, I believe is asking how. I could have read it wrong, cause us accused FD ***** owners have a tendancy to read the question our way. But my answer still stands this has been covered more times then people sneeking pics of the purple car on here. Which by the way hasn't happened in a long time. There is an excellant write up on this in the archives.

I sent the guy in the right direction to answer the above question. Coldy will probably put his copy and paste answer on here in the future. I wonder why he would have a copy and paste answer?

pimpncuba

thank you

pimpncuba

i just wanted a quick answer as in what i would have to replace (intake manifold, etc) and how much time and money it would take.

pimpncuba

could anyone post a link to the write up. i have seached everything and can't find it.

seanrot

iTrader: (2)

here ya go

https://www.rx7club.com/forum/showth...ighlight=turbo

pimpncuba

thanks

pimpncuba

that write up is for a 12a, is a 13b more of an easy bolt on?

pimpncuba

does anyone know if i could just bolt a turbo II intercooler, intake manifold, turbo, exhaust manifold, etc. onto my car?

Siraniko

iTrader: (13)

TII turbo exhaust will fit any 13-B motor but the GSL-SE intake will require quite a bit of grinding to clear the turbo. On the other hand, the TII's lower intake manifold will require mods too to fit a GSL-SE motor.

pimpncuba

could someone post a list of parts that i would need to get a hold of to pull off this swap. i think if i knew everything i needed to change i could make the modifications to the parts to make it work.

NanaimoRx-7

Also in the archives.

https://www.rx7club.com/forum/showth...hreadid=108398

pimpncuba

i saw that thread while looking earlier. that is a entire engine swap. i was wondering if i could just swap turbo II manifolds and the turbo onto my engine