20B RX-7 first start up - videos up now
#1
S3 RX-7 - 20BT 450 RWHP
Thread Starter
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
20B RX-7 first start up - videos up now
Well it has finally been started. I have four videos up at the moment.
These are taken while running off the 20BT map.
All that is left to do now is find a decent size accelerator cable, blue plate it and rego.
If anyonecan help out with suggestions for the cable, please only respond if you know what works.
It obviously sounds a lot different in real life, much louder. It is running one 3" straight through muffler at the rear.
First startup - First time 20B had been fired up, running off 20BT map. Sound taken from front 23.2 mb
http://www.rotary20b.com/videos/20b/...tart_front.avi
Same as above, taken from rear of car. Start, small rev & idle 10.2 mb
http://www.rotary20b.com/videos/20b/start_back.avi
Sound from back of car, couple of small revs & idling 4.3 mb
http://www.rotary20b.com/videos/20b/back_small_rev.avi
Same as above, taken close to exhaust, idle & rev 5.5 mb
http://www.rotary20b.com/videos/20b/back_rev.avi
These are taken while running off the 20BT map.
All that is left to do now is find a decent size accelerator cable, blue plate it and rego.
If anyonecan help out with suggestions for the cable, please only respond if you know what works.
It obviously sounds a lot different in real life, much louder. It is running one 3" straight through muffler at the rear.
First startup - First time 20B had been fired up, running off 20BT map. Sound taken from front 23.2 mb
http://www.rotary20b.com/videos/20b/...tart_front.avi
Same as above, taken from rear of car. Start, small rev & idle 10.2 mb
http://www.rotary20b.com/videos/20b/start_back.avi
Sound from back of car, couple of small revs & idling 4.3 mb
http://www.rotary20b.com/videos/20b/back_small_rev.avi
Same as above, taken close to exhaust, idle & rev 5.5 mb
http://www.rotary20b.com/videos/20b/back_rev.avi
Trending Topics
#18
S3 RX-7 - 20BT 450 RWHP
Thread Starter
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gonzz
Give us some details on the build-up.. S5 N/A rotors?
20B rebuilt using all 20B parts. Large extend port. Kept lower comp rotors as will most likely go turbo down the track.
#22
Lives on the Forum
Join Date: Apr 2005
Location: san diego
Posts: 23,563
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rotary20B
Cost.. less than 10k usd, for everything.
20B rebuilt using all 20B parts. Large extend port. Kept lower comp rotors as will most likely go turbo down the track.
20B rebuilt using all 20B parts. Large extend port. Kept lower comp rotors as will most likely go turbo down the track.
#23
S3 RX-7 - 20BT 450 RWHP
Thread Starter
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LaRazaUnida
what kinda gas mileage you get?
Car hasn't been driven yet, only started
#24
S3 RX-7 - 20BT 450 RWHP
Thread Starter
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2cute
just beautiful. thats all i can say about the car . but idk about the price you mentioned. how much custom fabing was there and so on?
I got a good deal, have been going to this workshop for around 10 years now.
That 10k USD is ecu, gearbox, fuel pumps, radiator, everything.
#25
Lives on the Forum
Join Date: Apr 2005
Location: san diego
Posts: 23,563
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rotary20B
A lot.
I got a good deal, have been going to this workshop for around 10 years now.
That 10k USD is ecu, gearbox, fuel pumps, radiator, everything.
I got a good deal, have been going to this workshop for around 10 years now.
That 10k USD is ecu, gearbox, fuel pumps, radiator, everything.