1st gen with 13btt?
1st gen with 13btt?
I was wondering if anyone had any info on a engine swap with a 13btt into a 1st gen rx7. also if i would need to use original trans or if it would just be easier to match 3rd gen tranny as well.
nother rican witha rotary
Joined: Mar 2002
Posts: 1,034
Likes: 0
From: S.Otown
Junior Member
Joined: Feb 2006
Posts: 10
Likes: 0
From: usa
Originally Posted by thafox
Ask and you shall recieve! 
https://www.rx7club.com/1st-generation-specific-1979-1985-18/13b-rew-1st-gen-write-up-495644/
https://www.rx7club.com/1st-generation-specific-1979-1985-18/13b-rew-1st-gen-write-up-495644/
REW'd FB
Joined: Dec 2004
Posts: 2,685
Likes: 1
From: WA
It was a TT Stock twins will fit in there just fine. I just wanted more power.
Don't use the REW tranny unless you are doing it like the second write-up. If you are using the SE front cover then use a T2 tranny. I will most likely be strong enough for what you need, parts are cheaper, engine is easier to remove/install, and relocation of the shifter can be done.
Z
Stock twins will fit in there just fine. I just wanted more power.Don't use the REW tranny unless you are doing it like the second write-up. If you are using the SE front cover then use a T2 tranny. I will most likely be strong enough for what you need, parts are cheaper, engine is easier to remove/install, and relocation of the shifter can be done.
Z
