1982 igniter problem
01-22-07, 09:44 PM
#1
Newbie
Thread Starter
Join Date: Jan 2007
Location: bothell
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1982 igniter problem
so my 1982 rx7 isn't getting spark. The coils, wires, and plug are all good. Anyone know how to check if the igniters are good? ANy suggestion on the best way to fix a spark problem would be greatly appreciated
01-22-07, 11:35 PM
#2
Currently Winning
Join Date: May 2002
Location: Birmingham, AL
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Checked the dizzy cap/rotor?
There is a step by step process to check the igniters in the FSM. You can search for it I think. Or check the FAQ at the top of the 1st Gen section.
You could try swapping the two igniters (the trailing and the leading) and this might give you leading spark, which would get the car running.
There is a step by step process to check the igniters in the FSM. You can search for it I think. Or check the FAQ at the top of the 1st Gen section.
You could try swapping the two igniters (the trailing and the leading) and this might give you leading spark, which would get the car running.
Thread
Thread Starter
Forum
Replies
Last Post
