1980 ignitors and stuff
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: KY
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
1980 ignitors and stuff
ok...I am going to convert to a 2nd gen direct fire setup. I have a 1980 rex. Which ignitor on the fender is the leading and trailing? Also, on the Leading coil, I have two yellow and black wires running to one side. I am guessing this is positive. What's up with that?
I am also considering doing the GM HEI ignitor and wondering if anyone has done the 2nd gen setup and runs a GM HEI also?
I am also trying to wire this puppy up without really cutting the factory harness. Any suggestings on terminals that I can use to plug into the stock harness of the ignitor to run the GM HEI?
This should be an interesting mod for me...
I am also considering doing the GM HEI ignitor and wondering if anyone has done the 2nd gen setup and runs a GM HEI also?
I am also trying to wire this puppy up without really cutting the factory harness. Any suggestings on terminals that I can use to plug into the stock harness of the ignitor to run the GM HEI?
This should be an interesting mod for me...
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM