13x7 wheels
Thread Starter
Yeah, shutup kid.
Joined: Mar 2002
Posts: 1,686
Likes: 2
From: Columbus, OH
13x7 wheels
Mods, I know this should be in the for sale section, but I have had it there for over a month with no replys.
I need a set of 13x7 wheels for the 4x110 bolt pattern to mount my slicks on. Their condition doesn't matter at all, as long as they aren't dented or have flat spots on them. The cheaper the better
-Matt
I need a set of 13x7 wheels for the 4x110 bolt pattern to mount my slicks on. Their condition doesn't matter at all, as long as they aren't dented or have flat spots on them. The cheaper the better
-Matt
Rotary Enthusiast
Joined: Feb 2003
Posts: 803
Likes: 0
From: lol
i have some 13" 4x110 enkei wheels... mesh style, polished lip... was gonna redo them, like you redid your 15's... kinda starvin for some $$ now.... might redo them just to make little bit mroe cash... not sure... anything im not using on my 80 is going...... i got pics of what they look like if you want them...
Check them out! Thats where I get my race wheels from.
Trending Topics
Thread Starter
Yeah, shutup kid.
Joined: Mar 2002
Posts: 1,686
Likes: 2
From: Columbus, OH
No, they're $70 a piece, so it would be $280+ shipping.
I got my set of 15x6 Weds European's for $100, covered in hardened brake dust that I had to get off. ****, if a new set of 13x7's was only $160, then I'd buy them in a second, but I don't have much money at all and I need to get everything for my car as cheap as possible. The only way I even got the slicks is because I found them for free I was at Mid-Ohio for the SCCA Nationals, I found a set of 4 in the "trash" tire pile, they had one race on them, probably 90%-95% rubber left.
I got my set of 15x6 Weds European's for $100, covered in hardened brake dust that I had to get off. ****, if a new set of 13x7's was only $160, then I'd buy them in a second, but I don't have much money at all and I need to get everything for my car as cheap as possible. The only way I even got the slicks is because I found them for free
I was at Mid-Ohio for the SCCA Nationals, I found a set of 4 in the "trash" tire pile, they had one race on them, probably 90%-95% rubber left.
My FSP Fiesta eats Jettas
Joined: Aug 2002
Posts: 1,616
Likes: 3
I have some 13X7 wheels that my friend had his rains mounted on for his GT3 RX3 that I would let go cheap.
The fronts have been re-drilled for the 4X110mm Mazda pattern, but the rears fit a Ford 8.8 rearend and would need to be redrilled. They are "turbine" style wheels in very good condition. They also have nice metal valve stems installed. Would 20 bucks apiece + shipping make it worth it for you to have the two redrilled?
Here's a pic, I'd need to get the P7s dismounted.
The fronts have been re-drilled for the 4X110mm Mazda pattern, but the rears fit a Ford 8.8 rearend and would need to be redrilled. They are "turbine" style wheels in very good condition. They also have nice metal valve stems installed. Would 20 bucks apiece + shipping make it worth it for you to have the two redrilled?
Here's a pic, I'd need to get the P7s dismounted.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
