1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections
View Poll Results: 13inch Panasports on daily driver 7
13inch Panasports are undriveable
0
0%
13inch Panasports are ugly
3
16.67%
13inch Panasports are driveable AND look good
15
83.33%
Multiple Choice Poll. Voters: 18. You may not vote on this poll

13inch Panasports on GSL-SE

Thread Tools
 
Search this Thread
 
Old Feb 10, 2004 | 06:25 PM
  #1  
1984special's Avatar
Thread Starter
So little time and money
Tenured Member 15 Years
 
Joined: Feb 2003
Posts: 746
Likes: 1
From: NorCAL
13inch Panasports on GSL-SE

I found some 13X7 Panasports, but I think they're way too small...

Anyways, I found a lot of pics of 15inch Panasports and they look badass. I know some racers have the 13inch rim, but I haven't been able to find any pics. So, does anyone have a picture of 13inch panasports on a 7? I'd appreciate it! Thanks

Also, are there any drivability problems with running a smaller wheel? I only know of lower top speed. And the GSL-SE offset is 40mm, correct?




15s look great!
Reply
Old Feb 10, 2004 | 07:07 PM
  #2  
web777's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,228
Likes: 0
From: LOS ANGELES
I'm curious how they would look also. I was thinking of getting 13's with 50 series tires.
Reply
Old Feb 10, 2004 | 07:13 PM
  #3  
85rotarypower's Avatar
love the braaaap
Tenured Member 15 Years
 
Joined: Jul 2003
Posts: 3,771
Likes: 5
From: Bognor, Ontario
Yes, 13's are small, but thats what all non -SE RX-7's run. The + style rims are 13" allong with the style on the 79-80 cars. All 13".

As for top speed, there will be no difference if you make sure the overall tire and wheel diameter is the same as stock. Circumference will then be the same, and no change in top speed.
Reply
Old Feb 11, 2004 | 12:37 AM
  #4  
Gregs's Avatar
Banned. I got OWNED!!!
 
Joined: Nov 2002
Posts: 4,980
Likes: 0
From: KING COUNTY, WA
13's will NOT fit with the gsl-se brakes
Reply
Old Feb 11, 2004 | 03:07 PM
  #5  
specRX7_22's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 1,013
Likes: 0
From: Eastern PA
I can show you what 13" panasports look like... thats the spec size for SRX7.. lemme attempt to upload a pic
Reply
Old Feb 11, 2004 | 03:14 PM
  #6  
specRX7_22's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 1,013
Likes: 0
From: Eastern PA
nevermind... im sorry i dont have a side view of the car
Reply
Old Feb 11, 2004 | 04:13 PM
  #7  
MosesX605's Avatar
My wife bought me 2 RX-7s
Tenured Member 20 Years
 
Joined: Aug 2001
Posts: 2,328
Likes: 3
From: Saskatoon, Saskatchewan, Canada
Originally posted by Gregs
13's will NOT fit with the gsl-se brakes
My buddy runs 13 inch wheels for autoX on his '86 GX with no troubles, I don't see why a SE would be any different.
Reply
Old Feb 11, 2004 | 04:31 PM
  #8  
1984special's Avatar
Thread Starter
So little time and money
Tenured Member 15 Years
 
Joined: Feb 2003
Posts: 746
Likes: 1
From: NorCAL
Hey thanks for all the replies. I guess the only way to see if they fit will be to actually try them.
I tried to figure out offset and what not, and if the brakes would fit, and the seller just said to try them on. Guess we'll know how 13" Panasports look like soon enough

Thanks again. Pictures soon!

Last edited by 1984special; Feb 11, 2004 at 04:38 PM.
Reply
Old Feb 12, 2004 | 11:44 AM
  #9  
hiboost7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 565
Likes: 0
From: winter park ,fl
damn that silver one is one of the cleanest looking FB's ive seen in awhile. im thinking of getting 15 inch panasports and paint the inside gun metal to match my paint...do you guy think that would look good? http://members.cardomain.com/hiboost7 theres my car
Reply
Old Feb 12, 2004 | 12:13 PM
  #10  
rx7gslse's Avatar
EX Pres of DFW Drunks
Tenured Member: 25 Years
 
Joined: Feb 2001
Posts: 8,132
Likes: 1
From: DFW, TX/Mexico
Originally posted by MosesX605
My buddy runs 13 inch wheels for autoX on his '86 GX with no troubles, I don't see why a SE would be any different.
some brands of 13s fit, some do not... I beleive the panasports do, but I'm not puttingthat in writing..

I run diamond racing 13s on mine and I have about 2mm of clearance between the front dust shields and the rim shell.
Reply
Old Feb 12, 2004 | 02:18 PM
  #11  
web777's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 1,228
Likes: 0
From: LOS ANGELES
Originally posted by rx7gslse
some brands of 13s fit, some do not... I beleive the panasports do, but I'm not puttingthat in writing..

But you just did!!

But seriously, I believe 13" Panasports should have no clearance issues.
Reply
Old Feb 12, 2004 | 02:39 PM
  #12  
MikeLMR's Avatar
'Last Minute' Rallying
Tenured Member 05 Years
 
Joined: May 2002
Posts: 1,193
Likes: 0
From: Lincoln, England
Originally posted by web777
But you just did!!

But seriously, I believe 13" Panasports should have no clearance issues.
believing is not good enough

This is an easy one to solve, Email panasport ... or Compomotive or whichever company you wish to buy your minilight knock offs from and ask them for the dimensions for a rim with the correct size and offset and then measure the car.

otherwise you will end up with a set of 13" rims that are specifically made for a car they will not fit ... can you say door stops
Reply
Old Feb 13, 2004 | 03:03 AM
  #13  
Rotary13B1's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Sep 2002
Posts: 1,900
Likes: 6
From: 626/323/213
Re: 13inch Panasports on GSL-SE



Would the owner of this 7 please come to the front counter .....there has been a small accident..hahaha

Mel, does this belong to you??? she's so shiny!
Reply
Old Feb 13, 2004 | 03:31 AM
  #14  
RacerX7fb's Avatar
paradox
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 1,296
Likes: 2
From: SoCal
Yes I shined her up oh so nicely with 15" Panasports.. but much prettier in action, like in my avatar than sitting at a show.
Reply
Old Feb 13, 2004 | 08:23 AM
  #15  
85rotarypower's Avatar
love the braaaap
Tenured Member 15 Years
 
Joined: Jul 2003
Posts: 3,771
Likes: 5
From: Bognor, Ontario
Did you guys forget about bolt pattern issues? The GSL-SE bolt pattern is 4x114.3. The non -SE cars are 4x110.

As for offset, 40mm seems like a lot. I think most FWD cars have about a 40-42mm offset. I would think closer to 35mm or less. Refering to a Mustang, I think they have a 28mm offset. That is a RWD car.
Reply
Old Feb 13, 2004 | 11:17 AM
  #16  
MikeLMR's Avatar
'Last Minute' Rallying
Tenured Member 05 Years
 
Joined: May 2002
Posts: 1,193
Likes: 0
From: Lincoln, England
Originally posted by 85rotarypower
Did you guys forget about bolt pattern issues? The GSL-SE bolt pattern is 4x114.3. The non -SE cars are 4x110.

As for offset, 40mm seems like a lot. I think most FWD cars have about a 40-42mm offset. I would think closer to 35mm or less. Refering to a Mustang, I think they have a 28mm offset. That is a RWD car.
40mm offset is about perfect with a 7" rim (maybe 38 to be safe) ...and bolt pattern isn't really a problem with wheels that are custom order.
Reply
Old Feb 13, 2004 | 01:45 PM
  #17  
frstgen12a's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 202
Likes: 0
From: michigan
does anyone know where to get the front air dam thats on that red car?
Reply
Old Feb 13, 2004 | 03:07 PM
  #18  
Dan H's Avatar
Zoom Zoom Boom!
Tenured Member 15 Years
 
Joined: Mar 2003
Posts: 2,312
Likes: 0
From: San Francisco, CA
How much does a set of 15" Panasport rims cost? (for the street rim)
Reply
Old May 29, 2004 | 05:49 AM
  #19  
jimmyjoejoe's Avatar
I AM A THIEF!! READ THE FEEDBACK SECTION!
Tenured Member 05 Years
 
Joined: Feb 2003
Posts: 212
Likes: 0
From: Southern Cali
i have a pair of 13x6.5 rims that fit se's very tight clearance. my set with tires is like $350 if you guys want it
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
Oct 1, 2015 09:25 PM




All times are GMT -5. The time now is 06:31 PM.