12a turbo project
Trending Topics
#15
Full Member
iTrader: (1)
Join Date: Sep 2008
Location: Dallas
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
My eyes hurt, lol
Congrats on the build! Reep the benefits of all the time/work/$
You need to make a video of a walk around and a couple passes and post that **** on youtube, post the link
Congrats on the build! Reep the benefits of all the time/work/$
You need to make a video of a walk around and a couple passes and post that **** on youtube, post the link
Last edited by jones75240; 11-28-08 at 07:51 PM.
#23
bassrotor
Thread Starter
Join Date: Jan 2007
Location: kissimmee
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
has a carb was a 650 cfm holley I used the center piece,and the throttle plate, remove the fuel bowl and sealed all way around with some resine, used a ford tps and adpated to the shaft of primarie, and weld injectors bunds to the racing beat intake manifold, I did all the work my self, exept the hole for the bund, toke it to a machine shop and used a milling machine to make the angle 30 degree, is a 12a streetport, the only modf in the engine is a used double side seal spring for better boosting . also is running with MICROTECH LT-10S fuel and ignition.