12a Turbo
#2
#6
Hei!
Ta og send meg nummeret ditt på 90976449, så skal jeg rote frem spjeldhuset mitt og ta en ****.
For all the others that doesnt speak norwegian, this is what you need.
Things that needs to be feed with vacuum when using a standalone like Haltech
- MAP sensor
- Fuel pressure regulator
- Wastegate
- Throttle bodies (the butterflies that are operated by vacuum)
- Oil jets (yes the 12AT has these in the housings) assuming you are still running these
- Dump valve, if prefered.
Thats basically it.. You could also run the fuel vapor thingy, air pump and the rest of the rats nest, but i wouldnt bother..
Im guessing you are using a TII cas and a E6X. Kent Harald Strøm has done this conversion using a oem manifold (im running a TII manifold/TB), you could also try calling him.
Ta og send meg nummeret ditt på 90976449, så skal jeg rote frem spjeldhuset mitt og ta en ****.
For all the others that doesnt speak norwegian, this is what you need.
Things that needs to be feed with vacuum when using a standalone like Haltech
- MAP sensor
- Fuel pressure regulator
- Wastegate
- Throttle bodies (the butterflies that are operated by vacuum)
- Oil jets (yes the 12AT has these in the housings) assuming you are still running these
- Dump valve, if prefered.
Thats basically it.. You could also run the fuel vapor thingy, air pump and the rest of the rats nest, but i wouldnt bother..
Im guessing you are using a TII cas and a E6X. Kent Harald Strøm has done this conversion using a oem manifold (im running a TII manifold/TB), you could also try calling him.
Thread
Thread Starter
Forum
Replies
Last Post