12a tear down...
#1
Runnin slow for now
Thread Starter
Join Date: Sep 2005
Location: wichita kansas
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
12a tear down...
Im getting ready here in a month or so to get a 12a with the a/t from my shop class... What all exactly am i going to need, i know im going to port it so i will need those templates and the tools. but what all will i need to replace??? Then when i swap it over to my current 12a i will replace the clutch and stuff when i pull everything... Is there anything that im going to need to know when i go to do all this or when im swapping the 12a's out?
#2
Rotary Freak
Originally Posted by fatmanslim247
Im ready here in a month or so to get a shop class... i know im going to port it and the tools. but what all will i need to pull when i go to do all this swapping?
#4
Old Fart Young at Heart
iTrader: (6)
Pick up a late 1st gen FSM, online or hard copy, the Bruce Turrentine rebuild video, and as you shop teacher is going to tell you, Study. This is a learning experience for you and when you have a better understanding of the process, you can ask more specific questions.
#7
Runnin slow for now
Thread Starter
Join Date: Sep 2005
Location: wichita kansas
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
I dunno... the one in my car i believe is a 83 (its b/n swapped by the previous owner), i haven't gotten the number off the other motor yet to check it
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM