12A Rebuild. Early Type Housing vs Later Model?
#1
Full Member
Thread Starter
12A Rebuild. Early Type Housing vs Later Model?
Working on a 12A rebuild. A brand new 12A housing (milled down GSLSE housing) is about $2000, brand new early 12A Housings are only $400? Can they be mixed/ matched? Or is the Trochoid shape different?
#2
Out In the Barn
iTrader: (9)
If your speaking of the dual dizzy early housing, then they won't work. The early ones have one less through bolt. You need 1979-1985. I think if you use the 1979-1980, they might have some small differences but will work.
I'd either find nice used ones or build a four port 13B with 12A irons.
This is a good reference. https://www.mazdatrix.com/b1.htm
I'd either find nice used ones or build a four port 13B with 12A irons.
This is a good reference. https://www.mazdatrix.com/b1.htm
Last edited by KansasCityREPU; 07-14-18 at 04:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
homerj
Old School and Other Rotary
10
01-03-15 10:58 PM
Mazdax605
1st Generation Specific (1979-1985)
3
01-26-10 07:48 AM
junior-coyote
2nd Generation Specific (1986-1992)
3
09-01-01 08:42 AM