wiring questions
#1
777CheekZ
Thread Starter
wiring questions
hey guys
so im redoing the wiring on my car along with the emmisions delete and i have a few questions about these unknown wires and connectors
(yes ive searched the forum...many times but cant find what im looking for)
first off..my baby is a 1985 fb 12a base model
here are the connectors that are in question:
1- Check Connector
2- Throttle Sensor
3- Port Air Switching Valve
4- A.P.L solenoid (dafuq?!)
5- Short Connector
6- I.D richer solenoid
7- Carb Heater
8- Air Vent Solenoid Valve
9- Vacuum Switch
10- No.1 Temp Switch
11- Condenser
12- No.2 M.A.B Valve
13- Shutter Solenoid Valve
please help me out..if you know please tell me what they are/do and if i can delete them or not
thanks for your help!
so im redoing the wiring on my car along with the emmisions delete and i have a few questions about these unknown wires and connectors
(yes ive searched the forum...many times but cant find what im looking for)
first off..my baby is a 1985 fb 12a base model
here are the connectors that are in question:
1- Check Connector
2- Throttle Sensor
3- Port Air Switching Valve
4- A.P.L solenoid (dafuq?!)
5- Short Connector
6- I.D richer solenoid
7- Carb Heater
8- Air Vent Solenoid Valve
9- Vacuum Switch
10- No.1 Temp Switch
11- Condenser
12- No.2 M.A.B Valve
13- Shutter Solenoid Valve
please help me out..if you know please tell me what they are/do and if i can delete them or not
thanks for your help!
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,849
Received 2,609 Likes
on
1,851 Posts
#3
'85 12a
iTrader: (10)
I recently did the same to my 85 S model. The big connector under the window washer reservoir can be disconnected and the the whole thing removed. It involves cutting the tape that ties it to the essential wires. You'll see as you pull it out. When done you'll have a cleaner bay and a now useless wire harness looking similar to this. 84 85 Mazda First Gen RX7 Gslse GSL SE Right Side Engine CPU Wire Harness | eBay
#4
777CheekZ
Thread Starter
I recently did the same to my 85 S model. The big connector under the window washer reservoir can be disconnected and the the whole thing removed. It involves cutting the tape that ties it to the essential wires. You'll see as you pull it out. When done you'll have a cleaner bay and a now useless wire harness looking similar to this. 84 85 Mazda First Gen RX7 Gslse GSL SE Right Side Engine CPU Wire Harness | eBay
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM