Things you've made for your RX-7
#1
ERTW
Thread Starter
iTrader: (2)
Join Date: Nov 2004
Location: Waterloo, Ontario
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Things you've made for your RX-7
I'm just finishing up machining this at work to install on the street-ported S5 13B I'm swapping into my GSL-SE:
I'm interested in seeing what you guys have made for your 7's. I know we're an intelligent bunch, so there's got to be some pretty cool stuff out there... so let's see it!
I'm interested in seeing what you guys have made for your 7's. I know we're an intelligent bunch, so there's got to be some pretty cool stuff out there... so let's see it!
#5
RAWR
iTrader: (3)
I'm just finishing up machining this at work to install on the street-ported S5 13B I'm swapping into my GSL-SE:
I'm interested in seeing what you guys have made for your 7's. I know we're an intelligent bunch, so there's got to be some pretty cool stuff out there... so let's see it!
I'm interested in seeing what you guys have made for your 7's. I know we're an intelligent bunch, so there's got to be some pretty cool stuff out there... so let's see it!
Trending Topics
#10
ERTW
Thread Starter
iTrader: (2)
Join Date: Nov 2004
Location: Waterloo, Ontario
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Have it.
#11
My 7 is my girlfriend.
iTrader: (5)
Join Date: Feb 2006
Location: London, Ontario, Canada
Posts: 3,162
Likes: 0
Received 1 Like
on
1 Post
I made a mount for my Holley FPR, to position it away from the pinch weld. I need to redo it in the next couple weeks since the original one was made from pretty thin steel. I have thicker stuff at home and now I know what I'm going for so it should be easier. You can kind of see it towards the passenger side on the firewall.
#17
Stigulus Moderatorai
iTrader: (3)
Thank you guys, there is a write-up in the archives: https://www.rx7club.com/1st-gen-archive-71/engine-richard-sohn-metering-pump-adapter-install-810299/
#24
Got Rotors?
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
I made this center console for my cd player and for my gauges, I still have not finished it around the shifter or around the heater controls, but it works. I cut the stainless with a plasma cutter then punched the holes and slots with a punch press.
I also designed and made this carb hat, and ducted it toward the front with a K&N filter. I designed it in Solid Works and transfered it to Surf Cam to program it for a 3 Axis CNC. I cut it on a OKK out of a solid piece of aluminum.
I made a water temp sensor manifold to hold my water temp sensor. I made this style and also made a style for the heater hose for some one else. I turned them on a manual lathe and drilled and tapped them on a mill.
I also designed and made this carb hat, and ducted it toward the front with a K&N filter. I designed it in Solid Works and transfered it to Surf Cam to program it for a 3 Axis CNC. I cut it on a OKK out of a solid piece of aluminum.
I made a water temp sensor manifold to hold my water temp sensor. I made this style and also made a style for the heater hose for some one else. I turned them on a manual lathe and drilled and tapped them on a mill.