1st Gen General Discussion The place for non-technical discussion about 1st Gen RX-7s or if there's no better place for your topic

Silvers Neomax Coilovers- Special Offer

Thread Tools
 
Search this Thread
 
Old 12-17-19, 09:54 AM
  #1  
Junior Member
Thread Starter
 
RCA_Frankie's Avatar
 
Join Date: Dec 2019
Location: Chicago
Posts: 5
Likes: 0
Received 1 Like on 1 Post
Silvers Neomax Coilovers- Special Offer

Good morning guys. We at Race Consulting Agency have been working with Silvers North America on developing these coilovers for the first gen RX7. We have a special offer, which is purchase of the coilovers for $1095, and we will install them at RCA Garage free of charge. We would need the car for about a week to get everything fitted and set up. This is our final tested design and we are aiming to put them on a street car before Silvers North America puts them into mass production. This way we can set them to different heights, and alignment settings to and give them a final road test. The Silvers design is street and track proven, I currently run the Neomax coilover set on my track FC and they have been a wonderful set of coilovers especially considering the price range.

If you are interested please call us at (847) 220-7853 or message our facebook page.
We can also be reached at sales@raceconsultingagency.com.
Our address is 905 Allanson Rd, Mundelein, IL 60060
The car must be running and driving, and preferably closer to the stock side.


We have also worked in the past with Stance coilovers to produce a design for our time attack FB that ran two seasons in the Gridlife Time Attack series, and had a lot of success with that suspension. This is an even better true type coilover design, rather than the spring in bucket design from Stance. We are very excited to get these into final production.








Old 12-20-19, 05:46 AM
  #2  
Have RX-7, will restore


iTrader: (91)
 
mazdaverx713b's Avatar
 
Join Date: Oct 2003
Location: Ohio
Posts: 21,710
Received 1,051 Likes on 891 Posts
If you wish to sell products here on the forum that you produce or market for another company, you must become a vendor. This is a nice product and I would like to see it on the market but there are rules here that everyone must abide by.
Old 12-21-19, 01:33 PM
  #3  
Out In the Barn


iTrader: (9)
 
KansasCityREPU's Avatar
 
Join Date: Mar 2005
Location: KC
Posts: 6,054
Received 1,015 Likes on 801 Posts
Can you show how the fronts integrate with the factory spindle?
The following users liked this post:
Richard Miller (12-23-19)
Old 12-22-19, 07:59 PM
  #4  
Hello World

iTrader: (1)
 
jbherri2's Avatar
 
Join Date: Feb 2009
Location: North Carolina
Posts: 327
Received 11 Likes on 5 Posts
Can we see a set installed? Beautiful work, by the way!




All times are GMT -5. The time now is 12:21 PM.