Rota Makes SSR Mesh in 4x110?
#1
Rota Makes SSR Mesh in 4x110?
I have never come across this until I noticed an ebay ad selling a set of new 15x7's in 4x110.
Sure enough I check out Rotas website and see that the offer the wheel in 15x7 4x110 in FB offsets.
Is this legit? I am surprised I have not seen a single FB running this setup.
OS Mesh - ROTA Wheels
The fact that these can be sourced locally and is way better than overpaying for an original set of 4x110 wheels outweighs the whole Rota knockoff thing...
Sure enough I check out Rotas website and see that the offer the wheel in 15x7 4x110 in FB offsets.
Is this legit? I am surprised I have not seen a single FB running this setup.
OS Mesh - ROTA Wheels
The fact that these can be sourced locally and is way better than overpaying for an original set of 4x110 wheels outweighs the whole Rota knockoff thing...
#3
Waffles - hmmm good
iTrader: (1)
Yeah those just showed up on the radar for me the other day. I was looking for 15 to
supplement my waffles. These meshies and the Konig Rewind mini-lite knockoffs are the 2
real choices for new wheels.
Amazon has em too!
Along with the ebay ones:
Rota Wheel OS Mesh 15x7 4x110 RS Mazda RX2 RX3 RX4 RX7 | eBay
Both at about the same price for 4 of em, $675.
supplement my waffles. These meshies and the Konig Rewind mini-lite knockoffs are the 2
real choices for new wheels.
Amazon has em too!
Along with the ebay ones:
Rota Wheel OS Mesh 15x7 4x110 RS Mazda RX2 RX3 RX4 RX7 | eBay
Both at about the same price for 4 of em, $675.
#4
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,844
Received 2,605 Likes
on
1,848 Posts
Rota has had a bunch of wheels in 4x110, the RB is available in 4x110 too among others.
Trending Topics
#9
So I called a local shop that carries a lot of wheels. Seems like quite a long wait to get a set of Rotas in FB fitment... 6 months...
But I never called any other places to see what they say.
None the less they are available online for reasonable cost.
I have done a bit of reading and it sounds like 15x7 +20 will fit quite well, maybe just need a small spacer like 8 mm or so to make it perfect.
15X7 looks like a very common FB size so tons of good info and pics out there.
Would extended studs (thread in) with a small spacer (8 to 12mm) be reasonable? Then it's a matter of finding lug nuts with the proper thread and seat type. And of course coilovers.....
But I never called any other places to see what they say.
None the less they are available online for reasonable cost.
I have done a bit of reading and it sounds like 15x7 +20 will fit quite well, maybe just need a small spacer like 8 mm or so to make it perfect.
15X7 looks like a very common FB size so tons of good info and pics out there.
Would extended studs (thread in) with a small spacer (8 to 12mm) be reasonable? Then it's a matter of finding lug nuts with the proper thread and seat type. And of course coilovers.....
Last edited by tommyeflight89; 06-15-15 at 07:05 PM.
#10
I ordered a set from Amazon, only one set left! UPS managed to get them from California to Canada in 24hours.
Looks like I will need 12x1.5mm thread in studs, lug nuts, and maybe a set of spacers.
Pics to follow. Going with Yoko. S Drives in 195/50-15 and 205/50-15 front and rear. Unsure on spacers, I think I will get them mounted and see.
Looks like I will need 12x1.5mm thread in studs, lug nuts, and maybe a set of spacers.
Pics to follow. Going with Yoko. S Drives in 195/50-15 and 205/50-15 front and rear. Unsure on spacers, I think I will get them mounted and see.
#11
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,844
Received 2,605 Likes
on
1,848 Posts
might be a little late, but Rota asked us if we had any wheel design ideas, i was thinking a 15x7 waffle/campagnolo wheel.
lol, look the fiat guys take SA wheels, and change the bolt pattern, Specials | Abarth Exhausts
lol, look the fiat guys take SA wheels, and change the bolt pattern, Specials | Abarth Exhausts
#12
Waffles - hmmm good
iTrader: (1)
Holy ****! Now thats entertaining. And the call em Campagnolo Specials for gods sake. Plus they are selling them for $902.00.
1. Buy waffles cheap
2. Fill and drill for Fiat bolt pattern
3. Sell online
4. Profit
BTW, I'm still interested in those 15" waffles you mentioned. Any more from Rota on that project?
1. Buy waffles cheap
2. Fill and drill for Fiat bolt pattern
3. Sell online
4. Profit
BTW, I'm still interested in those 15" waffles you mentioned. Any more from Rota on that project?
#13
seattle seven
I ordered a set from Amazon, only one set left! UPS managed to get them from California to Canada in 24hours.
Looks like I will need 12x1.5mm thread in studs, lug nuts, and maybe a set of spacers.
Pics to follow. Going with Yoko. S Drives in 195/50-15 and 205/50-15 front and rear. Unsure on spacers, I think I will get them mounted and see.
Looks like I will need 12x1.5mm thread in studs, lug nuts, and maybe a set of spacers.
Pics to follow. Going with Yoko. S Drives in 195/50-15 and 205/50-15 front and rear. Unsure on spacers, I think I will get them mounted and see.
#14
All they had was the silver centers with polished lips. I may decide to mask and paint just the centers a bronze or or gold. I'll post pics here.
Should be arriving soon. I will run them on my stock suspension until I get a coilover setup organized. Most likely Stance coils.
I am also lookin for more info on using extended studs with spacers (not adapters). I will probably get 12mm spacers to end up at +8mm offset. I found a place that will make 4x110 spacers in our hub diameter for $60 a pair. I think I will need them anyway so that the fronts clear the coilovers.
Should be arriving soon. I will run them on my stock suspension until I get a coilover setup organized. Most likely Stance coils.
I am also lookin for more info on using extended studs with spacers (not adapters). I will probably get 12mm spacers to end up at +8mm offset. I found a place that will make 4x110 spacers in our hub diameter for $60 a pair. I think I will need them anyway so that the fronts clear the coilovers.
#15
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,844
Received 2,605 Likes
on
1,848 Posts
#18
Looks good! I have seen that pic before, part of what helped me decide on 15x7+20. I may need a spacer in the front for coilover clearance... to be determined.
The wheels arrived here are some pics. Very fast shipping from 18Racing (Via Amazon) with good service.
Wheels look excellent. Tires come in next week so I will be posting more pics once they are mounted.
I was worried about what lug bolts I would use (my cars wheels from the previous owner use an odd type of bolt with washers...). My buddy has a spare set of BMW lugs that will work perfectly. 12x1.5mm thread and a cone seat.
I ordered a set of plastic hub centric rings from ebay. Required 73mm to 59.6mm. Should work out well.
The wheels arrived here are some pics. Very fast shipping from 18Racing (Via Amazon) with good service.
Wheels look excellent. Tires come in next week so I will be posting more pics once they are mounted.
I was worried about what lug bolts I would use (my cars wheels from the previous owner use an odd type of bolt with washers...). My buddy has a spare set of BMW lugs that will work perfectly. 12x1.5mm thread and a cone seat.
I ordered a set of plastic hub centric rings from ebay. Required 73mm to 59.6mm. Should work out well.
#23
Ok, finally got them mounted up! I went with 195 and 205 50 Yoko Sdrives.
I have Stance coils that I am getting the rest of the remaining parts for, so no fear, the car will be lowered! Probably lower it 2" from where it is now it should look excellent.
I love the look of these wheels really makes my FB stand out.
I have Stance coils that I am getting the rest of the remaining parts for, so no fear, the car will be lowered! Probably lower it 2" from where it is now it should look excellent.
I love the look of these wheels really makes my FB stand out.
Thread
Thread Starter
Forum
Replies
Last Post
ray green
1st Gen General Discussion
2
09-02-15 06:35 AM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM