Oil cooler hardline options
#1
Junior Member
Thread Starter
Join Date: Apr 2022
Location: Minnesota
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Oil cooler hardline options
Hello I have a 1985 Mazda RX7 12a with a beehive oil cooler. I bought this car as a project car and have finally started it only to find it was spraying oil everywhere out of the engine hole. I believe this threaded hole goes to the beehive oil cooler through a hard line. I tried looking over the internet for replacements but could not find anything. Does someone make a oem one or is there an aftermarket one I should look into? Any help is much appreciated.
#2
Damn, it did start!
Part number
looks like Atkins has them. Or you can try a Mazda dealer.
N231-14-720B
looks like Atkins has them. Or you can try a Mazda dealer.
#3
Have RX-7, will restore
iTrader: (91)
These oil cooler lines will rust and leak from time to time. Mazda has thankfully kept them in stock. As stated above, Atkins Rotary or Mazdatrix should have them in stock or you can use the provided part number and order the line from your local Mazda dealer. Do not forget to order the four corresponding crush washers for the banjo bolts as well.
#4
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,829
Received 2,597 Likes
on
1,845 Posts
its NLA in the US, but looks to be available in Japan, https://www.amayama.com/en/part/mazda/n23114720b
Thread
Thread Starter
Forum
Replies
Last Post
rx7junkie170
1st Generation Specific (1979-1985)
18
11-03-18 06:18 AM
78Savanna
1st Generation Specific (1979-1985)
5
12-10-08 03:20 PM
Viking War Hammer
2nd Generation Specific (1986-1992)
3
11-09-08 01:36 PM