View Poll Results: 1st gen status
Turbo 1st gen owner
113
25.39%
In the process of adding a Turbo
122
27.42%
One day, i'd like to have a Turbo
194
43.60%
Im Supercharged!
16
3.60%
Voters: 445. You may not vote on this poll
How many people are acutally Turbo 1st gen owners, and who is in the process
#77
Rotating once again!!
Join Date: Jan 2004
Location: Campbell River, BC
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by coldy13
Tust me, if I can afford to put a turbo on my 12a, anyone can afford it. I make $6/hr, and work 10-20hrs a week. If you can do the labor yourself, it doesn't really cost much. My setup is easily under $1000.
Tust me, if I can afford to put a turbo on my 12a, anyone can afford it. I make $6/hr, and work 10-20hrs a week. If you can do the labor yourself, it doesn't really cost much. My setup is easily under $1000.
#83
Rotary Enthusiast
Join Date: Mar 2002
Location: Lagrange, KY
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
I'm working on putting an s5 motor in my 85 SE... granted right now, the car is stripped to a frame and being rust checked... and the motor is comming in the mail (well frieght.) Now im just saving up for a microtech, and i should be good to go in a few months... year... decades, the norm.
#84
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Just bought myself a S5 J-spec TII. It'll take a while to install, I still have some other jobs to do (non-car related) after moving to a new place.
The engine will probable be run on a Wolf 3D, I'll obviously use a custom exhaust setup, and I guess a FMIC is a logic step too.
I already started stripping the long block engine, as I obviously won't use most of the emmision control stuff.
The engine will probable be run on a Wolf 3D, I'll obviously use a custom exhaust setup, and I guess a FMIC is a logic step too.
I already started stripping the long block engine, as I obviously won't use most of the emmision control stuff.
#85
Senior Member
Join Date: Oct 2003
Location: Cloud Nine & Peak of God
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Is there such a thing as a Jspec TII engine? Are they just imported secondhand from Japan from a scrapped gen2 with he same specifications as what was sold in the USA and other exprt markets?
Certainly they were different specifications for the 12A with the USA getting the most detuned version due to fuel consumption and emission problems. But for the 13B and 13BT I have not seen details of any differences. LHD and RHD are a different issue.
I must admit surprise at the few people who say they have a turbo engine, only 2% of people who have read the thread Forum members are the most enthusiastic RX-7 owners so the real percantage will be very much lower. Say 600-700 conversions worldwide?
Certainly they were different specifications for the 12A with the USA getting the most detuned version due to fuel consumption and emission problems. But for the 13B and 13BT I have not seen details of any differences. LHD and RHD are a different issue.
I must admit surprise at the few people who say they have a turbo engine, only 2% of people who have read the thread Forum members are the most enthusiastic RX-7 owners so the real percantage will be very much lower. Say 600-700 conversions worldwide?
#86
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by web777
Your header panel needs to be aligned with your fender!
Your header panel needs to be aligned with your fender!
RotaryReVn-
The intercooler is the large black Isuzu NPR, with the black paint removed.
#87
Rotary Enthusiast
Originally posted by fitzwarryne
I must admit surprise at the few people who say they have a turbo engine, only 2% of people who have read the thread Forum members are the most enthusiastic RX-7 owners so the real percantage will be very much lower. Say 600-700 conversions worldwide?
I must admit surprise at the few people who say they have a turbo engine, only 2% of people who have read the thread Forum members are the most enthusiastic RX-7 owners so the real percantage will be very much lower. Say 600-700 conversions worldwide?
A small group of us here in Canberra (Australia's capital city) have started a rotary based club. The city has a population of only about 350,000 people. We have had only upto 35 cars at a meet, and of those maybe 4 max are N/A, and only two of those are 1st gen 7s. The meets are made up of a majority of 1st gens, obviously of which most are turbo.
Trust me when I say, that turbo 1st gens are very common down under.
#91
Originally posted by Directfreak
RotaryReVn-
The intercooler is the large black Isuzu NPR, with the black paint removed.
RotaryReVn-
The intercooler is the large black Isuzu NPR, with the black paint removed.
Nice pics Bern!
#92
Got Boost?
iTrader: (1)
Join Date: Sep 2003
Location: Harrisville, WV
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Im in the process, and i found that it is costing about $3000 over my original estimate. Im using a an s5 motor and tranny, TO4B w/.96 AR, HKS exhaust manifold w/external HKS 40mm wastegate, starion FMIC, Haltech E6X, Walbro GSL-392 inline pump, ACT EXTREME clutch kit, Bosch 1600cc injectors w/K2RD fuel rail, 2 oil coolers, electric cooling fan, AN fuel and oil lines. I have all the parts, just gotta put 'em in.
AND to answer WanKeL FD RX-7, yes you could but you most likely need to find TII w/ a good computer and other goodies you will need( like wiring and ign. coils)
AND to answer WanKeL FD RX-7, yes you could but you most likely need to find TII w/ a good computer and other goodies you will need( like wiring and ign. coils)
#96
I have a S4 13B turbo motor in my S2, I also have some of the components including a GT3540 Garrett. A few things to add, and a little bit of elbow grease and I'll be there.
#98
HEAVY METAL THUNDER
Join Date: Oct 2002
Location: Elsenborn, Belgian Eifel
Posts: 3,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fitzwarryne
Is there such a thing as a Jspec TII engine? Are they just imported secondhand from Japan from a scrapped gen2 with he same specifications as what was sold in the USA and other exprt markets?
Certainly they were different specifications for the 12A with the USA getting the most detuned version due to fuel consumption and emission problems. But for the 13B and 13BT I have not seen details of any differences. LHD and RHD are a different issue.
Is there such a thing as a Jspec TII engine? Are they just imported secondhand from Japan from a scrapped gen2 with he same specifications as what was sold in the USA and other exprt markets?
Certainly they were different specifications for the 12A with the USA getting the most detuned version due to fuel consumption and emission problems. But for the 13B and 13BT I have not seen details of any differences. LHD and RHD are a different issue.
Well, I don't know... I live in Belgium, Europe. What I do know is that there are different part numbers for Japanese TII then EU spec TII. Now, different numbers don't have to mean different parts.
As for 13B (NA) EU and USA are rather different: we have no cats, still use distributors, have completely different lower intake manifolds and aux ports...
I'm not sure for the Japanese market, I can only compare US and EU here.
As for TII: that's a bit harder, officially the parts are not the same, but they might be 100% identic.
#99
Senior Member
Join Date: Oct 2003
Location: Cloud Nine & Peak of God
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Rotary Emotions- thanks for the information, all I could get was the porting was identical unlike the 12A versions. Regarding different part numbers, I have bought parts from the US and the number was nothing like the Japanese equivalent but they were identical components.