Finally installed my wheel package on the LS
#26
Ask me about my wankel
Thread Starter
Join Date: May 2006
Location: Bay City, Michigan
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
The BF’s are amazing. Its still pretty cold around here with temps around 50 but they still are very sticky. With the stronger side wall handling, I have very quick response but it is also a rougher ride. I took the tires up to about 100mph with little noise (very quite tire). I would will buy these tires again.
The size is 250/50/15 which is the smallest these tires come in.
The size is 250/50/15 which is the smallest these tires come in.
#31
Your Arch Enemy
please click: http://www.radiodeejay.hr/forum/lang/inexed.htm
Both your cars look awesome with the Rewinds. Last night I was researching wheels and you have convinced me to go with them.
You both are using 205/50 tires. Any thoughts on going with a wider tire?
Does anyone else have Rewinds photos?
Both your cars look awesome with the Rewinds. Last night I was researching wheels and you have convinced me to go with them.
You both are using 205/50 tires. Any thoughts on going with a wider tire?
Does anyone else have Rewinds photos?
#32
Stigulus Moderatorai
iTrader: (3)
please click: http://www.radiodeejay.hr/forum/lang/inexed.htm
Both your cars look awesome with the Rewinds. Last night I was researching wheels and you have convinced me to go with them.
You both are using 205/50 tires. Any thoughts on going with a wider tire?
Does anyone else have Rewinds photos?
Both your cars look awesome with the Rewinds. Last night I was researching wheels and you have convinced me to go with them.
You both are using 205/50 tires. Any thoughts on going with a wider tire?
Does anyone else have Rewinds photos?
As for the tire size, with 205/50 and a set of racing beat springs, you just clear. I used some 1/8" spacers to give a little more clearance. If you want to go any wider, you will have to get into a coil-over setup.
#33
Your Arch Enemy
please click: http://www.radiodeejay.hr/forum/lang/inexed.htm
I can't make the link go away, it is stuck in my yahoo mail too.
The Racing Beat springs are 1" drop. Right?
I can't make the link go away, it is stuck in my yahoo mail too.
The Racing Beat springs are 1" drop. Right?
#34
Stigulus Moderatorai
iTrader: (3)
please click: http://www.radiodeejay.hr/forum/lang/inexed.htm
I can't make the link go away, it is stuck in my yahoo mail too.
The Racing Beat springs are 1" drop. Right?
I can't make the link go away, it is stuck in my yahoo mail too.
The Racing Beat springs are 1" drop. Right?
The RB springs are a 1" drop from stock, but stock setups sag and sometimes installing the lowering springs actually raise the car. Take a look at my pictures for the stance. Keep in mind that the rear is the same as the front because I loosened all the bolts for the linkage in the rear end, and then tightened them down with the weight of the car on the new springs.
#36
Your Arch Enemy
please click: http://www.radiodeejay.hr/forum/lang/inexed.htm
Sarge, you just gave me a project for the day. I don't know what forum bucks are, but will let you know the spyware removal goes.
I am going to try the wheels without any other mods and see what happens, but will follow your spring advice if I get rubbing.
Sarge, you just gave me a project for the day. I don't know what forum bucks are, but will let you know the spyware removal goes.
I am going to try the wheels without any other mods and see what happens, but will follow your spring advice if I get rubbing.
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM
rx8volks
Canadian Forum
3
08-20-15 10:24 PM