blwflys rx7
#1
blwflys rx7
has been a long time since i have owned a rx7 and now im really happy i got one to add to my collection
its a 83 gsl 109,000miles body's in really good shape sadly the interior is not but it runs good but needs alot of little things taken care of overall im really happy and cant wait to daily drive it..
future rotorheads lol
its a 83 gsl 109,000miles body's in really good shape sadly the interior is not but it runs good but needs alot of little things taken care of overall im really happy and cant wait to daily drive it..
future rotorheads lol
#3
looks like i have to do some serious maintenance on my car needs a total fluid flush coolent isnt even green brake fluids brown.. noticed the front drivers side dowel is leaking a little.oh the fun of rx7s .
let my wife take it for a spin today she likes it untill i drove home and did donuts and burnouts she was scared shitless..
let my wife take it for a spin today she likes it untill i drove home and did donuts and burnouts she was scared shitless..
#7
Thanks guys.the more i drive the more issues seem to surface .
1 Headlights are stuck up. Im thiking fuse.
2 Hi beams only work if i hold the lever towards me. Combo has bad contact ?
3 gauge cluster lights went out .fuse/dimmer related?
4 under decel i get a weird problem like 1 rotor runs usally 5 sec deal. Thinking its ignition related coils/ignitor barely hanging on.
5 shifter is really lose its anoying vibration.is there a bushing or somthing.
6sometimes its hard to put in gear "no grinding" . Trans needs new fluid maybe hydralics bleed to will help
1 Headlights are stuck up. Im thiking fuse.
2 Hi beams only work if i hold the lever towards me. Combo has bad contact ?
3 gauge cluster lights went out .fuse/dimmer related?
4 under decel i get a weird problem like 1 rotor runs usally 5 sec deal. Thinking its ignition related coils/ignitor barely hanging on.
5 shifter is really lose its anoying vibration.is there a bushing or somthing.
6sometimes its hard to put in gear "no grinding" . Trans needs new fluid maybe hydralics bleed to will help
Trending Topics
#12
1st-Class Engine Janitor
iTrader: (15)
1 Headlights are stuck up. Im thiking fuse.
2 Hi beams only work if i hold the lever towards me. Combo has bad contact ?
3 gauge cluster lights went out .fuse/dimmer related?
4 under decel i get a weird problem like 1 rotor runs usally 5 sec deal. Thinking its ignition related coils/ignitor barely hanging on.
5 shifter is really lose its anoying vibration.is there a bushing or somthing.
6sometimes its hard to put in gear "no grinding" . Trans needs new fluid maybe hydralics bleed to will help
2 Hi beams only work if i hold the lever towards me. Combo has bad contact ?
3 gauge cluster lights went out .fuse/dimmer related?
4 under decel i get a weird problem like 1 rotor runs usally 5 sec deal. Thinking its ignition related coils/ignitor barely hanging on.
5 shifter is really lose its anoying vibration.is there a bushing or somthing.
6sometimes its hard to put in gear "no grinding" . Trans needs new fluid maybe hydralics bleed to will help
2) More likely the combo switch needs disassembly and cleaning; the little ratchet gizmo that controls holding the high-beams on until next pull may be gummed up or damaged.
3) Dimmer, dimmer connector both candidates as well as fuse. The dash-lights 10A fuse looks to be shared with the 'down' function for the headlights, so that might be a hint. Remember that a blown fuse isn't a problem - it's a symptom of a problem; something blew the fuse.
5) There's a nylon bushing at the bottom end of the shift lever. Could be your issue. Cheap, but a bit of work to get to.
#14
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,832
Received 2,603 Likes
on
1,847 Posts
#15
thanks DivinDriver,j9fd3s for the advice..
i found that the tail illum fuse 10a was blown which seems to power dash and head light down function replaced it but only to fail 3hrs later so ill have to find the cause,,
jeff i don't see how i couldnt get that out of what u wrote. You stated my deaccelerate "issue" was normal and was caused by the shudder valve. I further questioned if it would still do it at idel and if that was normal. anyhow ill look in the manual as to what the shudder valve does and aslo look into testing my tps.
im enjoying the **** out of the car did a mpg calculation im getting 25mpg with some rape driving and hiway.
i found that the tail illum fuse 10a was blown which seems to power dash and head light down function replaced it but only to fail 3hrs later so ill have to find the cause,,
jeff i don't see how i couldnt get that out of what u wrote. You stated my deaccelerate "issue" was normal and was caused by the shudder valve. I further questioned if it would still do it at idel and if that was normal. anyhow ill look in the manual as to what the shudder valve does and aslo look into testing my tps.
im enjoying the **** out of the car did a mpg calculation im getting 25mpg with some rape driving and hiway.
#18
worked on the 7 today changed engine oil, tranny oil,3rd member oil, coolent got replaced, bleed the brakes and clutch with the help of my 6year old.
found that the hose that goes to the the non exsistant cats was just open to atmosphere so I caped that. and called it a day..
yet to investigate the decell issue ill research on the tps,shutter valve etc tonight..
found that the hose that goes to the the non exsistant cats was just open to atmosphere so I caped that. and called it a day..
yet to investigate the decell issue ill research on the tps,shutter valve etc tonight..
#20
Has anyone used rtv sealent instead of a gasket on the waterpump housing.what did you use and did you keep the shims on.. Ill try and get some gasket paper and make one otherwise ill do the above and im pretty confident i have done it before with success
Thanks
Thanks
#25