*** 1st Gen 1/4 Mile Leader Board ***
#126
Junior Member
Join Date: Dec 2006
Location: haverhill, ma
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
whats up guys, my friend is from lawrence mass and he went to the track in epping nh and he did 12.5 in the 1/4 mile with the vacumm boost (15 psi) breaking off while shifting in 3rd gear and a few weeks before that he did 11.9 with tires slipping ( street tires). he could off break his record if the boost vacumm didnt give him problem, he thinks he could get the car to 10's or low 11's. he is a member here( jtoyrx7) and the car is street use, daily drive, what u guys think about that. cool huh
Last edited by rotarypower01; 10-25-07 at 01:40 PM.
#127
whats up guys, my friend is from lawrence mass and he went to the track in epping nh and he did 12.5 in the 1/4 mile with the vacumm boost (15 psi) breaking off while shifting in 3rd gear and a few weeks before that he did 11.9 with tires slipping ( street tires). he could off break his record if the boost vacumm didnt give him problem, he thinks he could get the car to 10's or low 11's. he is a member here( jtoyrx7) and the car is street use, daily drive, what u guys think about that. cool huh
#129
Full Member
Join Date: Oct 2007
Location: Harrow,ON,Ca
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
It might be mentioned in the 6 pages here somewhere but does it have to be rotary powered? I assume thats the spirit of the list but are non-rotary 1st geners welcome??
#133
love the braaaap
Not sure why, but the info for my run is not accurate. The time and speed are right, but I'm stockport and ran a Edelbrock 600 at the time, untuned, not a holley.
#135
Rotary Enthusiast
Join Date: Aug 2006
Location: Melbourne FL/San Antonio TX/Okinawa Japan
Posts: 1,216
Likes: 0
Received 10 Likes
on
10 Posts
http://groups.msn.com/ChucksRX7/1983...to&PhotoID=117
This is old, hope it still counts.
1983 13b S4 ported
T66 p-trim .96
20/22 psi
Stock 1st gen trans, D/S, rear diff and axles.
SDS fuel ecu with 1st gen dizzy
Car has since gone to the junk yard, 18 wheeler hit the right rear quarter.
This is old, hope it still counts.
1983 13b S4 ported
T66 p-trim .96
20/22 psi
Stock 1st gen trans, D/S, rear diff and axles.
SDS fuel ecu with 1st gen dizzy
Car has since gone to the junk yard, 18 wheeler hit the right rear quarter.
#137
Famous Taillights
iTrader: (3)
Went down to the track today to get some runs in. My camera isn't wanting to take pictures of the timeslips very well and I have no scanner so I'll just type my best time.
R/T...0.519
60'...2.360
330'...6.679
1/8...10.349
MPH...67.53
1000'...13.441
1/4...16.090
MPH...84.43
Specs on the car. 1979 SA "S", 69K mile 12A with RB Road Race header collected and straight piped to RB power pulse muffler, RB Power pulse Air box with foam filter, 2nd Gen Direct Fire ignition with FC BUR7EQ leading plugs and BRE8EQ14 trailing plugs, emissions removed. I actually was suprised. I was hoping for high 16's and my first run was a 16.6 and it came down from there. With some new tires and a porperly running carb I'll hit 15's on stock port. I had some traction issues off the line and she spun a little in 2nd. Overall I'm very happy.
R/T...0.519
60'...2.360
330'...6.679
1/8...10.349
MPH...67.53
1000'...13.441
1/4...16.090
MPH...84.43
Specs on the car. 1979 SA "S", 69K mile 12A with RB Road Race header collected and straight piped to RB power pulse muffler, RB Power pulse Air box with foam filter, 2nd Gen Direct Fire ignition with FC BUR7EQ leading plugs and BRE8EQ14 trailing plugs, emissions removed. I actually was suprised. I was hoping for high 16's and my first run was a 16.6 and it came down from there. With some new tires and a porperly running carb I'll hit 15's on stock port. I had some traction issues off the line and she spun a little in 2nd. Overall I'm very happy.
#143
Committee Member #2
iTrader: (29)
Alrighty.... I will add my numbers to the list...
This was on April 5 at Moroso Motorsports Park when Nopi was in town. I decided to go ahead and participate in the Test N Tune session.
R/T - .066
60' - 2.234
330 - 6.114
1/8 - 8.970 MPH - 83.41
1000 - 11.372
1/4 - 13.325 MPH - 116.86
This was on street tires (215/40/16) and 93 pump gas.
I am running a TII streetported motor, 70-1 turbo with a Holley blowthru setup at 15 PSI.
As you can see I need to get some traction so drag radials are in my future..
L8R
This was on April 5 at Moroso Motorsports Park when Nopi was in town. I decided to go ahead and participate in the Test N Tune session.
R/T - .066
60' - 2.234
330 - 6.114
1/8 - 8.970 MPH - 83.41
1000 - 11.372
1/4 - 13.325 MPH - 116.86
This was on street tires (215/40/16) and 93 pump gas.
I am running a TII streetported motor, 70-1 turbo with a Holley blowthru setup at 15 PSI.
As you can see I need to get some traction so drag radials are in my future..
L8R