Post Pics of your FD Wheel Fitment!!
#1002
#1004
Senior Member
iTrader: (5)
BUT if your modifying the rear fender then go 10.5 or higher
With the 10.5 ull have to roll the fender and run slightly stretched tires at the least.
I choose 10.5 because im either gonna be pulling the fenders or gonna use the extra burnout rear fenders i have on the shelf.
ps-the burnouts fenders i have are for sale
Last edited by zman600; 06-13-12 at 07:09 PM.
#1011
Junior Member
Join Date: Jun 2011
Location: Long Island NY
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I would like to run with these wheels es 1.1.1 18x9.5f +30. 18x10.5r +30 but will 285 30 18 rear fit well with rollled fender lip? Ive been researching but help needed. Thanks
#1013
I can't believe your rear don't rub. What is your spring rate? I got 12k front and 10k rear and my rear tires rub in the inner arch when my tank is full and i still got 1/2 inch of wheel gap.
Last edited by GoodfellaFD3S; 06-21-12 at 09:22 AM. Reason: Quote
#1014
#1015
They do rub a little, well the rear drivers does as that fender doesn't have as much pull as the other one, and the other one tucks slightly more then the drivers side. The arches were pulled in about 2 hours, it was only to get the clearance.
I've also forgot to mention the rears now have a 20mm spacer, the wheels are 18X10 et12 but with the 20mm spacer they're more like 18x10 et -8.
The camber needs adjusting and I think I'll be all clear.
#1025
Junior Member
Join Date: Dec 2010
Location: Washington
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Varrstoen 111
18x9.5 +22
18x10.5 +22
255/35/18
275/35/18
-Eibach springs 1"drop front 1.5" drop rear (before you say anything...yes I'm going to coilovers/lower soon)
-Rolled rear fenders
-Feed front fenders
-needs slight alignment done.
*also I'm still debating between feed rear fenders or a very aggressive pull in the rear. I'm leaning towards doing the pull tho.
vs
Stock (of coarse)
16x8 +50 all around
-Tien coilovers (set very low)
18x9.5 +22
18x10.5 +22
255/35/18
275/35/18
-Eibach springs 1"drop front 1.5" drop rear (before you say anything...yes I'm going to coilovers/lower soon)
-Rolled rear fenders
-Feed front fenders
-needs slight alignment done.
*also I'm still debating between feed rear fenders or a very aggressive pull in the rear. I'm leaning towards doing the pull tho.
vs
Stock (of coarse)
16x8 +50 all around
-Tien coilovers (set very low)