FD Aggressive Wheels & Stretched Tires
#1
FD Aggressive Wheels & Stretched Tires
Hello ladies and gentlemen, this thread is dedicated to people running aggressive wheel setups.
Like on Zilvia: No chewbacca-spec sunken battleship shadow offsets here. We're talking micro minimal millimeters of clearance between lips and fenders.
WIDE wheels and STRETCH tires ONLY.
Rules to follow :
1. Stay on topic. Private conversations don't belong here.
2. Don't post lame setups.
3. Make sure you post sizing information and fitment necessities.
4. Share your pictures.
5. Just in case you skipped #2... read it again!
-----------------------------------------------------------------------------------------------
Let's get this ball rolling!
F: 18x10 0 (A-disk) | 225/35/18
R: 18x13 +20 (O-disk) | 295/35/18
All fenders rolled and pulled
Like on Zilvia: No chewbacca-spec sunken battleship shadow offsets here. We're talking micro minimal millimeters of clearance between lips and fenders.
WIDE wheels and STRETCH tires ONLY.
Rules to follow :
1. Stay on topic. Private conversations don't belong here.
2. Don't post lame setups.
3. Make sure you post sizing information and fitment necessities.
4. Share your pictures.
5. Just in case you skipped #2... read it again!
-----------------------------------------------------------------------------------------------
Let's get this ball rolling!
F: 18x10 0 (A-disk) | 225/35/18
R: 18x13 +20 (O-disk) | 295/35/18
All fenders rolled and pulled
#2
Senior Member
iTrader: (4)
Not baller like deesan but will contribute since most say my wheels can't fit lol.
Gramlight 57D
18x9.5 +22/+14
Federal 595
235/40 all around
Fenders are bullshit "rolled" with a hammer and not even all the way. Could fit more if properly rolled lol.
Fender to ground height is 23.5in need smaller tires for more low.
Gramlight 57D
18x9.5 +22/+14
Federal 595
235/40 all around
Fenders are bullshit "rolled" with a hammer and not even all the way. Could fit more if properly rolled lol.
Fender to ground height is 23.5in need smaller tires for more low.
#4
man both of those look sick! any one know the specs on this car? Cleanliness is next to... - Stance Works
im trying to avoid pulling the fenders, and that looks about as much as you can go.
looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?
im trying to avoid pulling the fenders, and that looks about as much as you can go.
looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?
Last edited by OKI-FD; 04-07-13 at 09:54 AM.
#7
Rexxy
iTrader: (40)
man both of those look sick! any one know the specs on this car? Cleanliness is next to... - Stance Works
im trying to avoid pulling the fenders, and that looks about as much as you can go.
looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?
im trying to avoid pulling the fenders, and that looks about as much as you can go.
looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?
https://www.rx7club.com/suspension-w.../#post11432364
Trending Topics
#25
man both of those look sick! any one know the specs on this car? Cleanliness is next to... - Stance Works
im trying to avoid pulling the fenders, and that looks about as much as you can go.
looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?
im trying to avoid pulling the fenders, and that looks about as much as you can go.
looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?