FD Aggressive Wheels & Stretched Tires
 

Hello ladies and gentlemen, this thread is dedicated to people running aggressive wheel setups.

Like on Zilvia: No chewbacca-spec sunken battleship shadow offsets here. We're talking micro minimal millimeters of clearance between lips and fenders.

WIDE wheels and STRETCH tires ONLY.

Rules to follow :

1. Stay on topic. Private conversations don't belong here.
2. Don't post lame setups.
3. Make sure you post sizing information and fitment necessities.
4. Share your pictures.
5. Just in case you skipped #2... read it again!
-----------------------------------------------------------------------------------------------
Let's get this ball rolling!

F: 18x10 0 (A-disk) | 225/35/18
R: 18x13 +20 (O-disk) | 295/35/18

All fenders rolled and pulled

Attachment 676454

Attachment 676455

Attachment 676456

Attachment 676457

Attachment 676458

Attachment 676459

Attachment 676460

Not baller like deesan but will contribute since most say my wheels can't fit lol.

Gramlight 57D

18x9.5 +22/+14

Federal 595

235/40 all around

Fenders are bullshit "rolled" with a hammer and not even all the way. Could fit more if properly rolled lol.

Fender to ground height is 23.5in :icon_tdow need smaller tires for more low.

Attachment 676404

Attachment 676405

Attachment 676406

Attachment 676407

Attachment 676408

OP !!!! Love your car!!!! what size lips are those???

man both of those look sick! any one know the specs on this car? Cleanliness is next to... - Stance Works

im trying to avoid pulling the fenders, and that looks about as much as you can go.

looks to me like a 18x9.5 +30 ish and maybe 10.5 rear +15-30?

:dunno:FD Aggressive Wheels & Stretched Tires Thread:dunno:

Love it!, can you post camber specs also, i'm looking to do 17x9 +10 245/40 front and 255/40 rear. I'll be rolling/pulling also or just do RE-wide body kit.

If you are trying to avoid pulling fenders, then this is the thread you need to look at.

https://www.rx7club.com/suspension-w.../#post11432364

You can fit those with just a roll....

My camber is like -2.5 f/r

i think it will come down to tire/ camber... im pretty sure i have 0 camber and mine are 17x9 +17 with 255/40 NT05s at all 4 corners.

I personally think that is right around the max with JUST a roll/no camber. you may be able to squeeze that set up though

fags

wheel fitment is for gayshttp://24.media.tumblr.com/cf9d68508...l295o1_500.gif

roflmaoooooooooooooooooooooooo

Lol!!

hahahahaha fkin dying

whats the max i can run with feed front and rear fenders ?? want to do 18s really wide so i can put 285s up front and 315s in the back

Mine as it sit at the moment..

F 18X10 et12 225/40 Needs new tyre size
R 18X12 et20 265/35

http://farm9.staticflickr.com/8523/8...0ada4f6c_h.jpg

SSR - D5R wheels
Front: (18x9 -0) 225/35-18
Rear: (18x10.5 -26) 245/40-18

http://kickswhipschick.files.wordpre...uegorx7044.jpg
http://rimtuck.com/photos/401/1232681111.jpg

How do you deal cutying the fenders and keeping the plastic part inside of them?

Your rears are almost the same specs as my fronts.:icon_tup:

Current: 18x9.5 -35 (235/35), 18x11 -30 (245/35)
Attachment 673949
http://i7.photobucket.com/albums/y28...63680428_o.jpg



Old: 18x10 -33 (235/35), 18x12 -38 (275/35)
Attachment 673950
Attachment 673951

what front bumper is that n who makes it ?

Red is definitely the color for rx7's.

Love that front...so clean!

This car is so clean!!