Hey, I thought that I would let you all know that while I am STILL looking for a new job, (I'm a senior systems engineer by trade), I am offering my garage and my labor to all those needing work on their RX7!!!

I have owned several of these cars, and have been doing this for years now.

I have already done ALOT of work from people responding to this thread.

Lots of engine swaps, etc....
See the original thread for references and results....

I have all the special factory tools required to perform anything from an engine swap, to rebuilding and refurbising your interior!

I have a code scanner, a rotary compression tester (broken right now), engine hoist, full air tools, and much more in my well stocked garage.

You can rent my space and use anything I have for your project...

OR

I can fix almost EVERYTHING on your late model 2ND gen car!

And I can refurbish/repair nearly ANYTHING on any OTHER car. (RX7 or otherwise)

I have restored interiors on older and newer cars countless times.

SO, get a quote from your local mechanic, drop me a line, here or by email, and I WILL make it worth your while.

I know what I know, and I know what I dont know. If I can't help you, i'll say so....

BUT..... If i can, I promise i'll do it as good as (most of the time BETTER than) your local shop, or NO LABOR CHARGE!

Your satisfaction is guaranteed.

If you want to know more about me, my attitude twards these cars, and how fanatical i'll be when working on yours, just search for all posts by me.

Read and you'll see, that I will make sure you leave in 100% better condition than when you arrived.

Where else will you find someone to work on your car, cheaper than the big shops, that you KNOW isn't trying to cut corners, or get onto the next customer!

Help me out, while I look for my next big job, and I'll make sure you get what you need done and then some!

I can provide references of others whos cars I have worked on, and show you pictures of my RX7 projects in progress.

I promise to impress.

Reply here, OR email me below....

Lets help each other out!!!

Sniper_X
sniper_x@hotmail.com

Lawrenceville, GA 30043

 

bumpity bump

 

I wonder how much it will cost to fly you to Toronto. Hehehe

 

I went to St. Louis to work on a pair of convertibles before.

Airtran is a marvelous thing!!!

 

Just to back up Sniper...I have read dozens and dozens of his posts, and he knows his ****. If I lived closer, I would get you to help me fix my baby, but Texas is a ways off!! Sniper is one of the few people I would consider to wrench on my ride!! Keep up the good work!!

 

Thats it...
Im opening a garage this summer......

THANKS FOR THE SUPPORT!

 

Hey, your info is both well stated as well as true. You have never been rude or condescending to me, or in any response of yours I have read. Just puttin in a good word for an honest guy!!!! Good luck with the shop!! When I get my TII, do you do street porting?? If so, here in about 4 months, you may have a customer!!

 

Gee, I think you should be paying the RX-7 Forum for advertising in here now...


-Ted

 

How much to advertise on the board?

 

bumpity bumpers.

 

yeah i have had many of my trouble shotting problems solved thanks to sniper he definitly knows his ****!!

 

Thanks Stevo!

 

I am completeing the rebuild on a 1991 NA shortblock if anyone is interested.

 

bumpirtylicious!