FRI 11/4 Rotaries meet takes over Autobacs
FRI 11/4 Rotaries meet takes over Autobacs
Originally Posted by cherdjc
I can see the Future............
FRiday 11/4 8 pm Rotaries take over the Autobacs parking lot .......be there!!!
So this can come to pass
FRiday 11/4 8 pm Rotaries take over the Autobacs parking lot .......be there!!!
So this can come to pass
Trending Topics
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 26
Likes: 0
From: Lakewood
AUtobacs
Originally Posted by 79 seven
Where is autobacs??????off the 22 fwy...exit beach Big Autobacs sign ...you cant miss it ...or you shouldn't be driving...
Originally Posted by socalrotor
PM'ed you! Cool Im rollin my dented monster then.
I rolled down a mountian
Joined: Mar 2003
Posts: 548
Likes: 0
From: garden grove, california
if you can get the parts and get over here we'll get it done!
I got every ting you need! Five dolla fixie fixie!
edit: if you can just make it over here we can take my car to chase down parts.
I got every ting you need! Five dolla fixie fixie!
edit: if you can just make it over here we can take my car to chase down parts.
Originally Posted by geargrabber
if you can get the parts and get over here we'll get it done!
I got every ting you need! Five dolla fixie fixie!
edit: if you can just make it over here we can take my car to chase down parts.
I got every ting you need! Five dolla fixie fixie!
edit: if you can just make it over here we can take my car to chase down parts.
I rolled down a mountian
Joined: Mar 2003
Posts: 548
Likes: 0
From: garden grove, california
do yo have AAA? **** i dont know man, its your call.
all we need are a jack, jack stands, bucket, and handtools and a place to wrench. To drop the tranny all you do is wrestle it down.
If you wanted to do this cheap all you need is a clucth disc, so far its holding up for me. (year and a half)
mazdatrix sells these and has the oem ones in stock. (we can go see rx7girl
)
to do it proper would be to resurface the flywheel and use all new parts.
if you can get over here tomorrow morning i can talk you through it while I work.
we can get it done in a few hours, especially with two people working on it.
all we need are a jack, jack stands, bucket, and handtools and a place to wrench. To drop the tranny all you do is wrestle it down.
If you wanted to do this cheap all you need is a clucth disc, so far its holding up for me. (year and a half)
mazdatrix sells these and has the oem ones in stock. (we can go see rx7girl
)to do it proper would be to resurface the flywheel and use all new parts.
if you can get over here tomorrow morning i can talk you through it while I work.
we can get it done in a few hours, especially with two people working on it.
Originally Posted by geargrabber
do yo have AAA? **** i dont know man, its your call.
all we need are a jack, jack stands, bucket, and handtools and a place to wrench. To drop the tranny all you do is wrestle it down.
If you wanted to do this cheap all you need is a clucth disc, so far its holding up for me. (year and a half)
mazdatrix sells these and has the oem ones in stock. (we can go see rx7girl )
to do it proper would be to resurface the flywheel and use all new parts.
if you can get over here tomorrow morning i can talk you through it while I work.
we can get it done in a few hours, especially with two people working on it.
all we need are a jack, jack stands, bucket, and handtools and a place to wrench. To drop the tranny all you do is wrestle it down.
If you wanted to do this cheap all you need is a clucth disc, so far its holding up for me. (year and a half)
mazdatrix sells these and has the oem ones in stock. (we can go see rx7girl
)to do it proper would be to resurface the flywheel and use all new parts.
if you can get over here tomorrow morning i can talk you through it while I work.
we can get it done in a few hours, especially with two people working on it.
should I just get the CF? BTW I don't have AAA. If the clutch still holds, whats the worst that can happend?
My package is UPS 2 day ground from norcal,it left this morning so it should be here by monday. You got a flywheel tool? I hope to god I make it to the shop.......Side ways said he would follow me out there, I just need to to pick a time with VERY little traffic. How far are you from the freeway?
BTW MEET IS TONIGHT @8:00
BTW MEET IS TONIGHT @8:00
