Heater fan woes....
Thread Starter
Rotary Enthusiast
Joined: Oct 2002
Posts: 1,418
Likes: 3
From: Fairfax, VA
Heater fan woes....
Hey guys, whattya think?
on my '85, when I turn the fan for the heater on, you can hear the blower going at full speed, but only a whisper of air to comes out of the vents... possible blockage? Do these things have finicky blend doors?
Dan
on my '85, when I turn the fan for the heater on, you can hear the blower going at full speed, but only a whisper of air to comes out of the vents... possible blockage? Do these things have finicky blend doors?
Dan
Senior Member
Joined: Jan 2004
Posts: 505
Likes: 2
From: New Orleans, LA
Are the blend doors on the RX7's controlled by Vacuum Acuators, Electric Acuators or are they Cable operated?
That would make a huge difference on diagnosis.
I have a ALL Data system and i could pull up some tests if you like. What year is it??
That would make a huge difference on diagnosis.
I have a ALL Data system and i could pull up some tests if you like. What year is it??
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
There were two versions of the control for the blend doors on these cars...
One had a Sliding **** for the Vent, Floor, Defrost selection... Those were obviously cable actuated.
The other version has push buttons. These are electrically actuated.
One had a Sliding **** for the Vent, Floor, Defrost selection... Those were obviously cable actuated.
The other version has push buttons. These are electrically actuated.
Thread
Thread Starter
Forum
Replies
Last Post
atticus_jay
Interior / Exterior / Audio
6
Oct 23, 2015 11:16 AM