You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX7Club.com today!
Masterpower now have a new range of turbine design, I like to call it the gt range however Masterpower call them mpbt turbines.
They are still found in the common t4 range o p and q as well as many other trims in-between these, so basically will still fit all the common Garrett t4 housings.
here is a pic of the older p trim (left) vs the gt spec p trim (right) offered by Masterpower.
they are taller in height but have the same major and exduser dimension as the older range. With one less blade and totally new casting shape I am anxious to see how these compare with the older Garrett version.
I am hoping the new blade design with lighter construction will result in a faster spooling higher flowing t4 wheel than the previous masterpower garrett versions.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on RX7Club.com!
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Dealer for Masterpower Turbos.
Was about to start a thred for the same thing, lol
Would also be keen on seeing how they compare to typical garret T series wheels. Sounds Promicing. Anyone else used em, seen one or heard anythin about them?
Im looking for a turbo now, can you get a devided housing with a vband? I was looking at Master Powers site but they dont say anything about a new line of turbos
Im looking for a turbo now, can you get a devided housing with a vband? I was looking at Master Powers site but they dont say anything about a new line of turbos
haha yea i now, its even hard for me to get new product info from them. i have to keep inquiring to kep on top of it. But they are working on a new website at the moment.
yes divided housing with v band is no problem. .84 or 1.00. both are devided and available with v band.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Dealer for Masterpower Turbos.
Oliver, so will this new line compare with the Garret GT series or no? I'm not quite sure I understand the new line. But do give us some more info as you get it from MP.
You sure thats not just a knock off of a standard Garrett GT series wheel?
It's not
It's actually a knock off a turbine wheel design that's about 5yrs old allready.
It is still an upgarde from the original Garrett design though.
The GT turbine wheels are complety different design than the ones above. The only thing common to both wheels is that they are both 10 blade designs but flow wise the GT wheel is in a league of it's own
__________________
CRISPEED Rx-7 9.204@150.47
TRAVIESO RACING Rx-3 10.04@130.86mph ALL MOTOR
AWD MOTORSPORTS 8.75@163EVO8 GSR E85
AD TURBO 2JZ S2000 8.69@163 E85
CHARLES/RAW 2JZ S2000 8.7213@157
BIG DADDY PERFORMANCE SUPRA's MKIII 8.70@170/MKIV 7.95@180
Oliver, so will this new line compare with the Garret GT series or no? I'm not quite sure I understand the new line. But do give us some more info as you get it from MP.
Zach
no they are different to the garrett gt range.
will keep you guys posted
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Dealer for Masterpower Turbos.
are they going to make turbine flow maps available?
not sure, i do know there compressor flow maps were suposed to be available at the begining of this year.
so will need to check with the progress on that.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Dealer for Masterpower Turbos.
It's not
It's actually a knock off a turbine wheel design that's about 5yrs old allready.
It is still an upgarde from the original Garrett design though.
The GT turbine wheels are complety different design than the ones above. The only thing common to both wheels is that they are both 10 blade designs but flow wise the GT wheel is in a league of it's own
ahhh.... 5 year old technology Knock off?........ I think you need to be clear if thats an opinion. Masterpower is not a small Company, they do have an R&D team to develop new and improved technolgy.
but yes i dont believe they are the same as garrett gt.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Dealer for Masterpower Turbos.
you could go through 10 turbos and get it close enough by guessing....OR, you can look at a map, compare it to what you know, and get it right the first time.
Oliver, could you shoot me a PM with your turbo pricing please? There have been some people around here asking me about MP turbo's and I wanted to go through you first since I know I can trust you to take care of people. Thanks in advance.
Oliver, could you shoot me a PM with your turbo pricing please? There have been some people around here asking me about MP turbo's and I wanted to go through you first since I know I can trust you to take care of people. Thanks in advance.
Cheers,
Zach
cheers Zach. pm sent
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Dealer for Masterpower Turbos.
Anyone else used em, seen one or heard anythin about them?
Linear Mode
