Seeking distance from crank face to block face (FB or FC)
05-14-16, 01:54 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Los Angeles, CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Seeking distance from crank face to block face (FB or FC)
Hello,
I am using an RX-7 5-speed from an FC on a car with a Mazda K8 1.8L V6. Please don't hate me for the pistons.
Could someone help me out by measuring the distance from the crank shoulder that the flywheel presses up against to the block face that the bell housing bolts to?
The more precise, the better. This will allow me to machine a spacer to properly position the flywheel/clutch assembly.
Thanks!
Jesse.
I am using an RX-7 5-speed from an FC on a car with a Mazda K8 1.8L V6. Please don't hate me for the pistons.
Could someone help me out by measuring the distance from the crank shoulder that the flywheel presses up against to the block face that the bell housing bolts to?
The more precise, the better. This will allow me to machine a spacer to properly position the flywheel/clutch assembly.
Thanks!
Jesse.
Last edited by Jesse Brink; 05-14-16 at 06:40 PM. Reason: More accurately describe my request
Thread
Thread Starter
Forum
Replies
Last Post
2Lucky2tha7
Single Turbo RX-7's
8
04-22-16 02:46 PM